Difficulty

Moderate

Steps

7

Time Required

                          10 minutes

Sections

4

  • Optical Drive
  • 2 steps
  • Bottom Case
  • 3 steps
  • Battery
  • 1 step
  • RAM
  • 1 step

Flags

0

  • BackMSI GE62 6QF Apache Pro

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Optical Drive
  • Use a Phillips screwdriver to remove the 5mm screw securing the optical drive to the bottom case.

Use a Phillips screwdriver to remove the 5mm screw securing the optical drive to the bottom case.

1024

Step 2

  • Slide Optical Drive out of the computer.

Slide Optical Drive out of the computer.

Step 3

              Bottom Case
  • Use a Phillips screwdriver to remove the fourteen 5mm screws on the back of the laptop.
  • One of these screws is hidden under a sticker.

Use a Phillips screwdriver to remove the fourteen 5mm screws on the back of the laptop.

One of these screws is hidden under a sticker.

Step 4

  • Remove the three PH #0 2mm screws that were hidden underneath the optical drive.

Remove the three PH #0 2mm screws that were hidden underneath the optical drive.

Step 5

  • Use an opening tool to run along the seam of the case where the upper and bottom case meet.
  • Pry the bottom case and remove from the upper part.

Use an opening tool to run along the seam of the case where the upper and bottom case meet.

Pry the bottom case and remove from the upper part.

Step 6

              Battery
  • Remove the single PH #0 5mm screw holding the battery pack in place.
  • Remove the battery by sliding it away from the computer.

Remove the single PH #0 5mm screw holding the battery pack in place.

Remove the battery by sliding it away from the computer.

Step 7

              RAM
  • Pull the metal tabs that hold the RAM in place away horizontally from the RAM stick, and slide the RAM out of the socket.
  • Repeat the same steps for the other RAM stick.

Pull the metal tabs that hold the RAM in place away horizontally from the RAM stick, and slide the RAM out of the socket.

Repeat the same steps for the other RAM stick.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Juan Erquiaga

Member since: 09/26/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team S2-G3, Passmore Fall 2017                        

                                                  Member of USF Tampa, Team S2-G3, Passmore Fall 2017 



                    USFT-PASSMORE-F17S2G3                     


                                            3 Members                     


                                            5 Guides authored