Mr Coffee Tf6 Internal Water Tubes Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

2

• Bottom Cover
• 3 steps
• Internal Water Tubes
• 6 steps

Flags

0

• BackMr. Coffee TF6

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover               

• Facing the bottom of the TF6, carefully pull the two rubber feet out with your hands.

Facing the bottom of the TF6, carefully pull the two rubber feet out with your hands.

1024

Step 2

• Using a Phillips #1 screwdriver, remove the six 11mm Phillips screws that are holding the bottom cover in place.

Using a Phillips #1 screwdriver, remove the six 11mm Phillips screws that are holding the bottom cover in place.

Step 3

• Gently lift the bottom cover, detaching it from the main body of the TF6.

Gently lift the bottom cover, detaching it from the main body of the TF6.

Step 4

              Internal Water Tubes               

• Using your fingers, gently pinch and detach the two metal clips that secure the silicone tubing to the metal tubing on the TF6.

Using your fingers, gently pinch and detach the two metal clips that secure the silicone tubing to the metal tubing on the TF6.

Step 5

• Carefully pull the silicon tubing off of the metal tubing.

Carefully pull the silicon tubing off of the metal tubing.

Step 6

• Using a Phillips #1 screwdriver, remove the three 13mm Phillips screws that hold the lower and upper assemblies together.

Using a Phillips #1 screwdriver, remove the three 13mm Phillips screws that hold the lower and upper assemblies together.

Step 7

• Gripping the lower assembly with one hand and the upper assembly with the other, gently pull the assemblies apart.
• If all screws have been removed and the tubes have been detached, the assemblies should separate easily.

Gripping the lower assembly with one hand and the upper assembly with the other, gently pull the assemblies apart.

If all screws have been removed and the tubes have been detached, the assemblies should separate easily.

Step 8

• Using your fingers, gently pinch and detach the two metal clips that secure the silicone tubing to the plastic tubes on the upper assembly.

Using your fingers, gently pinch and detach the two metal clips that secure the silicone tubing to the plastic tubes on the upper assembly.

Step 9

• Carefully pull the silicon tubing off of the plastic tubing on the upper assembly.

Carefully pull the silicon tubing off of the plastic tubing on the upper assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Jordan                     

Member since: 01/31/2014

204 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 13-18, Regan Winter 2014                        

                                                  Member of Cal Poly, Team 13-18, Regan Winter 2014 



                    CPSU-REGAN-W14S13G18                     


                                            4 Members                     


                                            5 Guides authored