Difficulty

Moderate

Steps

10

Time Required

                          25 minutes

Sections

2

  • Base
  • 3 steps
  • O Ring
  • 7 steps

Flags

0

  • BackMr. Coffee DW13

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Base
  • Before performing this repair, be sure that your machine is unplugged and dry and that your work space is clean.
  • Flip the Mr. Coffee DW13 over so that the lid is facing away from you and the base is facing toward you.

Before performing this repair, be sure that your machine is unplugged and dry and that your work space is clean.

Flip the Mr. Coffee DW13 over so that the lid is facing away from you and the base is facing toward you.

1024

Step 2

  • Remove the eight 11 mm screws that secure the base of the machine with a Phillips Head #2 screwdriver.

Remove the eight 11 mm screws that secure the base of the machine with a Phillips Head #2 screwdriver.

Step 3

  • Gently lift the base cover to expose the inside of the coffee machine.

Gently lift the base cover to expose the inside of the coffee machine.

Step 4

              O Ring
  • Remove the two 13mm screws securing the silver support bracket using a #2 Phillips head screwdriver.

Remove the two 13mm screws securing the silver support bracket using a #2 Phillips head screwdriver.

Step 5

  • Gently lift the silver support bracket freeing the heating plate from the heating coil.

Gently lift the silver support bracket freeing the heating plate from the heating coil.

Step 6

  • Use needle-nose pilers to pinch and loosen the crimps

Use needle-nose pilers to pinch and loosen the crimps

Step 7

  • Once the crimps are loosened, slide them down the tubing.

Once the crimps are loosened, slide them down the tubing.

Step 8

  • Separate the tubing from the heating coil by grasping the tubing in one hand and the heating coil in the other and gently pulling apart.

Separate the tubing from the heating coil by grasping the tubing in one hand and the heating coil in the other and gently pulling apart.

Step 9

  • Place one of your hands on the front side of the heating plate.
  • Use this hand to gently push the heating plate towards yourself and out of the machine.

Place one of your hands on the front side of the heating plate.

Use this hand to gently push the heating plate towards yourself and out of the machine.

Step 10

  • Use a 2.5 mm Flathead Screwdriver to pry out the O-ring.

Use a 2.5 mm Flathead Screwdriver to pry out the O-ring.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors 


                    Madeline Landis

Member since: 01/21/2014

137 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 10-31, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 10-31, Maness Winter 2014 



                    CPSU-MANESS-W14S10G31                     


                                            4 Members                     


                                            6 Guides authored