Difficulty
Moderate
Steps
4
Time Required
3 - 6 minutes
Sections
1
- Water Reservoir
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackMr. Coffee DRX5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Water Reservoir
- Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover.
Use a Phillips #1 screwdriver to remove the two 9mm screws and the three 11mm screws on the bottom of the coffee maker and remove the bottom plastic cover.
1024
Step 2
- Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket.
Using a Phillips #1 screwdriver, remove 12mm screws from heating element bracket and remove bracket.
Step 3
- Remove 2 hose clamps from heating element. Remove heating element from tubes.
Remove 2 hose clamps from heating element. Remove heating element from tubes.
Step 4
- Using a Phillips #1 screwdriver, remove one 10mm screw, and three 11mm screws connecting the reservoir to the base and remove reservoir from the base.
Using a Phillips #1 screwdriver, remove one 10mm screw, and three 11mm screws connecting the reservoir to the base and remove reservoir from the base.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Michael Chhim
Member since: 03/21/2017
202 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team S2-G2, Isaacson Spring 2017
Member of UMass Dartmouth, Team S2-G2, Isaacson Spring 2017
UMASSD-ISAACSON-S17S2G2
3 Members
5 Guides authored