Difficulty
Easy
Steps
8
Time Required
25 minutes
Sections
1
- Hose Replacement
- 8 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackMr. Coffee
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hose Replacement
- Unplug the coffee maker.
- Empty the coffee maker reservoir.
Unplug the coffee maker.
Empty the coffee maker reservoir.
1024
Step 2
- Flip the coffee maker upside down.
- Remove the six 13.5 mm screws from the bottom of the coffee maker using a Phillips #3 screwdriver.
Flip the coffee maker upside down.
Remove the six 13.5 mm screws from the bottom of the coffee maker using a Phillips #3 screwdriver.
Step 3
- Remove the base using an opening tool.
Remove the base using an opening tool.
Step 4
- Pinch the metal ties with a pair of needle-nose pliers.
- Slide the metal tie off the metal tube base.
Pinch the metal ties with a pair of needle-nose pliers.
Slide the metal tie off the metal tube base.
Step 5
- Use a spudger to push against the plastic tubing and slide it off the metal tube base.
Use a spudger to push against the plastic tubing and slide it off the metal tube base.
Step 6
- Using a pair of needle-nose pliers, pinch the metal ties together and slide the metal tie up off of the base.
Using a pair of needle-nose pliers, pinch the metal ties together and slide the metal tie up off of the base.
Step 7
- To remove the tube, pinch the tubing and pull until it pops off.
To remove the tube, pinch the tubing and pull until it pops off.
Step 8
- Remove any debris from the base. If the filter is corroded, remove the filter by squeezing the filter and move it up the base of the tube until it comes out.
Remove any debris from the base. If the filter is corroded, remove the filter by squeezing the filter and move it up the base of the tube until it comes out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
JoMax Christensen
Member since: 11/19/2021
157 Reputation
1 Guide authored
Badges:
2
Team
Idaho State University, Team 1-11, Watkins Fall 2021
Member of Idaho State University, Team 1-11, Watkins Fall 2021
ISU-WATKINS-F21S1G11
3 Members
1 Guide authored