Difficulty
Moderate
Steps
7
Time Required
20 minutes
Sections
3
- Battery
- 4 steps
- Motherboard
- 2 steps
- Indicator Light Bulb
- 1 step
Flags
0
BackMpow MPBH063
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove four Hex 10 mm screws from the outer speaker cover displaying the speaker’s serial number indicated by the red circle.
- Carefully insert the spudger tool into one of the holes in the cover to pry open the outer cover of the speaker.
Remove four Hex 10 mm screws from the outer speaker cover displaying the speaker’s serial number indicated by the red circle.
Carefully insert the spudger tool into one of the holes in the cover to pry open the outer cover of the speaker.
1024
Step 2
- Remove four JIS J00 12mm screws.
- Remove the inner speaker cover with the precision tweezers and a spudger if needed.
Remove four JIS J00 12mm screws.
Remove the inner speaker cover with the precision tweezers and a spudger if needed.
Step 3
- Carefully detach the battery from the adhesive securing the battery to the inner wall of the speaker.
- Use the iFixit Adhesive Remover as directed to remove the battery from the inner wall of the speaker.
- Detach the battery from the inner wall without detaching the wires connecting the battery to the motherboard.
Carefully detach the battery from the adhesive securing the battery to the inner wall of the speaker.
Use the iFixit Adhesive Remover as directed to remove the battery from the inner wall of the speaker.
Detach the battery from the inner wall without detaching the wires connecting the battery to the motherboard.
Step 4
- Hold down the small lever on the white, plastic plug attached to the battery wires, and detach the wires from the white, plastic plug outlet on the motherboard.
Hold down the small lever on the white, plastic plug attached to the battery wires, and detach the wires from the white, plastic plug outlet on the motherboard.
Step 5
Motherboard
- Unplug all wires that are connected to the motherboard.
Unplug all wires that are connected to the motherboard.
Step 6
- Detach the motherboard from the speaker using the tech knife and the adhesive remover to remove the adhesive securing the motherboard.
- Use iFixit Adhesive Remover as directed.
- Use the precision tweezers with the blunt head to carefully grip and pull out the motherboard.
- Proceed with caution when using the tech knife and removing the motherboard as you do not want to cause injury to yourself or the device.
Detach the motherboard from the speaker using the tech knife and the adhesive remover to remove the adhesive securing the motherboard.
Use iFixit Adhesive Remover as directed.
Use the precision tweezers with the blunt head to carefully grip and pull out the motherboard.
Proceed with caution when using the tech knife and removing the motherboard as you do not want to cause injury to yourself or the device.
Step 7
Indicator Light Bulb
- Use the adhesive remover to loosen the light bulb.
- Gently remove bulb with the precision tweezers.
- Insert new light bulb and secure into place by using an adhesive.
Use the adhesive remover to loosen the light bulb.
Gently remove bulb with the precision tweezers.
Insert new light bulb and secure into place by using an adhesive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Bailey Bridges
Member since: 10/09/2018
145 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
Sam Houston State, Team S15-G5, Blackburne Fall 2018
Member of Sam Houston State, Team S15-G5, Blackburne Fall 2018
SHSU-BLACKBURNE-F18S15G5
3 Members
5 Guides authored
