Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

1

  • Daughterboard
  • 5 steps

Flags

0

  • BackMpow MPBH063

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Daughterboard
  • Remove four Hex 10 mm screws from the outer speaker cover displaying the speaker’s serial number indicated by the red circle.
  • Carefully insert the spudger tool into one of the holes in the cover to pry open the outer cover of the speaker.

Remove four Hex 10 mm screws from the outer speaker cover displaying the speaker’s serial number indicated by the red circle.

Carefully insert the spudger tool into one of the holes in the cover to pry open the outer cover of the speaker.

1024

Step 2

  • Remove four JIS J00 12mm screws.
  • Remove the inner speaker cover with the precision tweezers and a spudger if needed.

Remove four JIS J00 12mm screws.

Remove the inner speaker cover with the precision tweezers and a spudger if needed.

Step 3

  • Unplug the wire connected to the daughterboard.

Unplug the wire connected to the daughterboard.

Step 4

  • Remove the silver 10 mm screw from the center of the daughterboard.

Remove the silver 10 mm screw from the center of the daughterboard.

Step 5

  • Remove the daughterboard by carefully lifting the daughterboard out of the speaker with the metal spudger.
  • Use iFixit adhesive remover as directed
  • Before you remove the daughterboard, cut around the edges using the tech knife, and remove the adhesive securing the daughterboard to the speaker.

Remove the daughterboard by carefully lifting the daughterboard out of the speaker with the metal spudger.

Use iFixit adhesive remover as directed

Before you remove the daughterboard, cut around the edges using the tech knife, and remove the adhesive securing the daughterboard to the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Jazely Barrera

Member since: 10/09/2018

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Sam Houston State, Team S15-G5, Blackburne Fall 2018                        

                                                  Member of Sam Houston State, Team S15-G5, Blackburne Fall 2018 



                    SHSU-BLACKBURNE-F18S15G5                     


                                            3 Members                     


                                            5 Guides authored