Difficulty

Moderate

Steps

8

Time Required

                          6 - 15 minutes

Sections

2

  • Motorola XOOM 2 Media Edition Disassembly
  • 3 steps
  • Touch Screen
  • 5 steps

Flags

0

  • BackMotorola XOOM 2 Media Edition

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motorola XOOM 2 Media Edition Disassembly
  • Power off the device before beginning disassembly.
  • Remove six 2.7mm Torx #3 screws.

Power off the device before beginning disassembly.

Remove six 2.7mm Torx #3 screws.

1024

Step 2

  • There is adhesive attached to the underside of the back panel. Gradually lift the panel to avoid bending it out of shape.
  • Pry off the back panel using a plastic opening tool.
  • Using a plastic opening tool, slide the tool gently around the back cover to lift the cover off.

There is adhesive attached to the underside of the back panel. Gradually lift the panel to avoid bending it out of shape.

Pry off the back panel using a plastic opening tool.

Using a plastic opening tool, slide the tool gently around the back cover to lift the cover off.

Step 3

  • Pry off the black cover gradually using a plastic opening tool.

Pry off the black cover gradually using a plastic opening tool.

Step 4

              Touch Screen
  • Remove thirteen 2.55mm Torx #4 screws with Torx T4 screwdriver.

Remove thirteen 2.55mm Torx #4 screws with Torx T4 screwdriver.

Step 5

  • Use tweezers to pull up the white rubber cover.

Use tweezers to pull up the white rubber cover.

Step 6

  • Use the tweezers to pull up the small chip from its receiver.
  • Use the tweezers to pull up the larger chip from its receiver.
  • There is adhesive attached to the back of the larger chip on the touchscreen controller strip.
  • Use the tweezers to pull up one end of the small piece of tape that is holding the touchscreen controller.

Use the tweezers to pull up the small chip from its receiver.

Use the tweezers to pull up the larger chip from its receiver.

There is adhesive attached to the back of the larger chip on the touchscreen controller strip.

Use the tweezers to pull up one end of the small piece of tape that is holding the touchscreen controller.

Step 7

  • Use the tweezers to pull up and release the thin handle that is attached to the LCD connector.
  • Use the tweezers to pull out the LCD connector from its receptor.

Use the tweezers to pull up and release the thin handle that is attached to the LCD connector.

Use the tweezers to pull out the LCD connector from its receptor.

Step 8

  • Use a plastic opening tool to gradually separate the screen from the device.

Use a plastic opening tool to gradually separate the screen from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Lacie Broten

Member since: 09/28/2016

271 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team 2-2, Mathisen Fall 2016                        

                                                  Member of Eastern Washington University, Team 2-2, Mathisen Fall 2016 



                    EWU-MATHISEN-F16S2G2                     


                                            4 Members                     


                                            12 Guides authored