Difficulty
Difficult
Steps
4
Time Required
15 minutes
Sections
1
- Camera
- 4 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackMotorola W490
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Camera
- Open the phone so that the keypad and screen are facing up.
Open the phone so that the keypad and screen are facing up.
1024
Step 2
- Use the blue plastic opening tool to pry off all four of the rubber stickers from the upper inside face.
Use the blue plastic opening tool to pry off all four of the rubber stickers from the upper inside face.
Step 3
- Use the Torx T5 screw driver head to remove the four 5.4 mm screws from the upper inner face.
Use the Torx T5 screw driver head to remove the four 5.4 mm screws from the upper inner face.
Step 4
- Once the screws and upper casing have been removed, locate where the camera attaches to the upper circuit board and detach it using a pair of tweezers.
Once the screws and upper casing have been removed, locate where the camera attaches to the upper circuit board and detach it using a pair of tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 7 other contributors
Will Edwards
Member since: 10/22/2012
61 Reputation
9 Guides authored
Badges:
2
Team
Clemson, Team 14-1, Benson Fall 2012
Member of Clemson, Team 14-1, Benson Fall 2012
CLEM-BENSON-F12S14G1
4 Members
23 Guides authored