Motorola Syn1654A Microphone Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          4 - 9 minutes

Sections

Microphone
4 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

BackMotorola NFL Headset
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Microphone

Remove star head screw from above base of the microphone with T6 Torx Screwdriver.
To prevent stripping, use an appropriate bit and ensure screwdriver is oriented perpendicular to the face of the screw.

Remove star head screw from above base of the microphone with T6 Torx Screwdriver.

To prevent stripping, use an appropriate bit and ensure screwdriver is oriented perpendicular to the face of the screw.

1024

Step 2

To expose the next screw, peel foam cover from the base toward the end of microphone.
Remove screw with screwdriver and place in a safe location.

To expose the next screw, peel foam cover from the base toward the end of microphone.

Remove screw with screwdriver and place in a safe location.

Step 3

With Screws removed, remove the microphone from foam and plastic cover to be inspected.
If the microphone is corroded or wires are frayed, it must be replaced.

With Screws removed, remove the microphone from foam and plastic cover to be inspected.

If the microphone is corroded or wires are frayed, it must be replaced.

Step 4

Clip both wires to remove defective microphone.
Be sure to clip as close to the base of the microphone as possible in order to have enough wire for the new microphone.
Align wires with corresponding pads on new microphone and solder in place.
For soldering, see the Ifixit soldering guide: How To Solder and Desolder Connections

Clip both wires to remove defective microphone.

Be sure to clip as close to the base of the microphone as possible in order to have enough wire for the new microphone.

Align wires with corresponding pads on new microphone and solder in place.

For soldering, see the Ifixit soldering guide: How To Solder and Desolder Connections

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors

                    John Ware

Member since: 02/24/2014

325 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Michigan Tech, Team 5-1, Lauer Spring 2014                        

                                                  Member of Michigan Tech, Team 5-1, Lauer Spring 2014 



                    MTU-LAUER-S14S5G1                     


                                            2 Members                     


                                            3 Guides authored

Needs Better Images#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Needs Better Images

Introduction

What you need

Team