Motorola Slvr L7 Front Panel Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          15 - 25 minutes            

Sections

1

• Front Panel
• 8 steps

Flags

3

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackMotorola SLVR L7

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Front Panel               

• Push down on the black tab located at the top center of the Motorola phone

Push down on the black tab located at the top center of the Motorola phone

1024

Step 2

• Remove the battery by pulling the battery from the top center.

Remove the battery by pulling the battery from the top center.

Step 3

• Remove the four T6 2 mm TX Torx screws

Remove the four T6 2 mm TX Torx screws

Step 4

• Insert the flat end of a plastic opening tool and pry the metal cover up off the phone.

Insert the flat end of a plastic opening tool and pry the metal cover up off the phone.

Step 5

• Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a plastic opening tool.

Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a plastic opening tool.

Step 6

• Use a plastic opening tool to pry the antenna cable connectors from its respective socket on the motherboard.
• De-route the antenna cable by pulling it out.

Use a plastic opening tool to pry the antenna cable connectors from its respective socket on the motherboard.

De-route the antenna cable by pulling it out.

Step 7

• Use a spudger to lift and remove the black plastic screw cover at the bottom of the phone near the speaker
• The cover is attached by adhesive, so some force may be required.

Use a spudger to lift and remove the black plastic screw cover at the bottom of the phone near the speaker

The cover is attached by adhesive, so some force may be required.

Step 8

• Insert the flat end of a spudger and pry the frame off the phone.
• The frame is attached by adhesive, so some force may be required

Insert the flat end of a spudger and pry the frame off the phone.

The frame is attached by adhesive, so some force may be required

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Jorge Trujillo                     

Member since: 05/19/2011

520 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       CSU Los Angeles, Team 1-1, Nelson Spring 2011                        

                                                  Member of CSU Los Angeles, Team 1-1, Nelson Spring 2011 



                    CSULA-NELSON-S11S1G1                     


                                            2 Members                     


                                            4 Guides authored