Motorola Razr2 V9M Sd Card Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          3 - 5 minutes

Sections

Battery
4 steps
SD Card
2 steps

Flags

BackMotorola RAZR2 v9m
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Step 1

              Battery

Push the rear cover toward the hinge of the RAZR2. The panel will slide about 3 mm.

Push the rear cover toward the hinge of the RAZR2. The panel will slide about 3 mm.

1024

Step 2

Pinch the top and bottom edges of the panel and pull it away from the RAZR2.
The rear panel uses four small hooks to hold it in place. If the panel will not easily pull away, slide the panel more toward the hinge.

Pinch the top and bottom edges of the panel and pull it away from the RAZR2.

The rear panel uses four small hooks to hold it in place. If the panel will not easily pull away, slide the panel more toward the hinge.

Step 3

Gently pull the white plastic tab to lift the battery away from the RAZR2.
The white plastic tab is attached to the phone. Only pull it enough to expose the edges of the battery.

Gently pull the white plastic tab to lift the battery away from the RAZR2.

The white plastic tab is attached to the phone. Only pull it enough to expose the edges of the battery.

Step 4

To remove the battery, grasp its edges pull away from the phone.
When installing a new battery, be sure the metal contacts on the phone line up with the ones on the battery.

To remove the battery, grasp its edges pull away from the phone.

When installing a new battery, be sure the metal contacts on the phone line up with the ones on the battery.

Step 5

              SD Card

Press the exposed portion of the SD card towards the bottom of the phone until you hear a click. The SD card will slide into the phone about 10 mm.

Press the exposed portion of the SD card towards the bottom of the phone until you hear a click. The SD card will slide into the phone about 10 mm.

Step 6

Release the SD card. A spring will push it partially out of the phone.
Grasp the card by the edges and remove.
When installing a new SD card, remember that it must be 2 GB or less.

Release the SD card. A spring will push it partially out of the phone.

Grasp the card by the edges and remove.

When installing a new SD card, remember that it must be 2 GB or less.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    John T Roller

Member since: 06/04/2013

800 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       University of Kentucky Louisville, Team 1-2, Chamberlain Spring 2013                        

                                                  Member of University of Kentucky Louisville, Team 1-2, Chamberlain Spring 2013 



                    LOUISVILLE-CHAMBERLAIN-S13S1G2                     


                                            2 Members                     


                                            7 Guides authored

Introduction#

Team#

Introduction

Team