Difficulty
Difficult
Steps
4
Time Required
25 minutes
Sections
1
- Upper Casing (CDMA)
- 4 steps
Flags
0
BackMotorola Razr V3c
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Upper Casing (CDMA)
- Remove the four rubber pieces from all corners of the area around the screen.
Remove the four rubber pieces from all corners of the area around the screen.
1024
Step 2
- Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.
- Be sure that you do not strip or damage the screws.
Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.
Be sure that you do not strip or damage the screws.
Step 3
- Carefully pry the screen away from the phone using a plastic spudger.
- Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.
Carefully pry the screen away from the phone using a plastic spudger.
Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.
Step 4
- Take the screen housing off of the casing.
- Watch for small pieces falling out of the screen during this step. Keep track of these pieces.
Take the screen housing off of the casing.
Watch for small pieces falling out of the screen during this step. Keep track of these pieces.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 17 other contributors
krisko
Member since: 01/14/2010
95 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 11-4, Forte Winter 2010
Member of Cal Poly, Team 11-4, Forte Winter 2010
CPSU-FORTE-W10S11G4
3 Members
8 Guides authored