Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

3

  • Upper Casing (CDMA)
  • 4 steps
  • Camera (CDMA)
  • 4 steps
  • Screen (CDMA)
  • 2 steps

Flags

0

  • BackMotorola Razr V3c

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Upper Casing (CDMA)
  • Remove the four rubber pieces from all corners of the area around the screen.

Remove the four rubber pieces from all corners of the area around the screen.

1024

Step 2

  • Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.
  • Be sure that you do not strip or damage the screws.

Use a T4 screwdriver to carefully unscrew all four screws on the outer screen.

Be sure that you do not strip or damage the screws.

Step 3

  • Carefully pry the screen away from the phone using a plastic spudger.
  • Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

Carefully pry the screen away from the phone using a plastic spudger.

Pry slowly, as too much bending will crack the screen. There are also two fragile ribbon cables that connect the screen and camera to the phone.

Step 4

  • Take the screen housing off of the casing.
  • Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

Take the screen housing off of the casing.

Watch for small pieces falling out of the screen during this step. Keep track of these pieces.

Step 5

              Camera (CDMA)
  • Pry screen cover off with plastic opening tool.
  • The screen cover has some adhesive holding it to the screen.

Pry screen cover off with plastic opening tool.

The screen cover has some adhesive holding it to the screen.

Step 6

  • Remove small black sticker covering the camera ribbon connector.

Remove small black sticker covering the camera ribbon connector.

Step 7

  • Flip over small hinge that covers the camera ribbon connection.

Flip over small hinge that covers the camera ribbon connection.

Step 8

  • Pull off the rubber camera cover and camera.
  • The camera and camera cover may come off either separately or together.

Pull off the rubber camera cover and camera.

The camera and camera cover may come off either separately or together.

Step 9

              Screen (CDMA)
  • Disconnect the metallic ribbon cover.

Disconnect the metallic ribbon cover.

Step 10

  • Remove and replace the screen.

Remove and replace the screen.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    Joshua Ruehlig

Member since: 01/14/2010

503 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 11-4, Forte Winter 2010                        

                                                  Member of Cal Poly, Team 11-4, Forte Winter 2010 



                    CPSU-FORTE-W10S11G4                     


                                            3 Members                     


                                            8 Guides authored

Francis Reyes - Nov 12, 2012

Reply

Is it a T5 or a T4 for removing the screws?