Difficulty

Very easy

Steps

9

Time Required

                          10 minutes

Sections

3

  • Battery (CDMA)
  • 2 steps
  • Speaker (CDMA)
  • 6 steps
  • Motherboard (CDMA)
  • 1 step

Flags

0

  • BackMotorola Razr V3c

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery (CDMA)
  • Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.
  • Lift and remove the rear panel away from the V3c.

Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.

Lift and remove the rear panel away from the V3c.

1024

Step 2

  • Remove the battery by pushing in the top of the battery and lifting it away from the phone.

Remove the battery by pushing in the top of the battery and lifting it away from the phone.

Step 3

              Speaker (CDMA)
  • Unscrew the two screws in the back using the T6.

Unscrew the two screws in the back using the T6.

Step 4

  • Use the plastic opening tool to pop the bottom and the sides off the back casing.
  • Be careful not to pull the back lower cover off too far as it is connected to the phone body by a ribbon.

Use the plastic opening tool to pop the bottom and the sides off the back casing.

Be careful not to pull the back lower cover off too far as it is connected to the phone body by a ribbon.

Step 5

  • Peel off the connector between the motherboard and the body of the phone.

Peel off the connector between the motherboard and the body of the phone.

Step 6

  • Pull out the two black rubber covers using tweezers.
  • The second rubber cover is much harder to get out.

Pull out the two black rubber covers using tweezers.

The second rubber cover is much harder to get out.

Step 7

  • Pull out the white plastic cover by unclipping the two plastic pieces shown.

Pull out the white plastic cover by unclipping the two plastic pieces shown.

Step 8

  • Pull out the speaker.

Pull out the speaker.

Step 9

              Motherboard (CDMA)
  • Pull out the motherboard.
  • You may also now replace the bottom lower casing

Pull out the motherboard.

You may also now replace the bottom lower casing

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 3 other contributors 


                    Joshua Ruehlig

Member since: 01/14/2010

503 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 11-4, Forte Winter 2010                        

                                                  Member of Cal Poly, Team 11-4, Forte Winter 2010 



                    CPSU-FORTE-W10S11G4                     


                                            3 Members                     


                                            8 Guides authored