Difficulty
Moderate
Steps
11
Time Required
20 minutes
Sections
4
- Battery (CDMA)
- 2 steps
- Speaker (CDMA)
- 6 steps
- Motherboard (CDMA)
- 1 step
- Lower Casing (CDMA)
- 2 steps
Flags
0
BackMotorola Razr V3c
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery (CDMA)
- Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.
- Lift and remove the rear panel away from the V3c.
Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.
Lift and remove the rear panel away from the V3c.
1024
Step 2
- Remove the battery by pushing in the top of the battery and lifting it away from the phone.
Remove the battery by pushing in the top of the battery and lifting it away from the phone.
Step 3
Speaker (CDMA)
- Unscrew the two screws in the back using the T6.
Unscrew the two screws in the back using the T6.
Step 4
- Use the plastic opening tool to pop the bottom and the sides off the back casing.
- Be careful not to pull the back lower cover off too far as it is connected to the phone body by a ribbon.
Use the plastic opening tool to pop the bottom and the sides off the back casing.
Be careful not to pull the back lower cover off too far as it is connected to the phone body by a ribbon.
Step 5
- Peel off the connector between the motherboard and the body of the phone.
Peel off the connector between the motherboard and the body of the phone.
Step 6
- Pull out the two black rubber covers using tweezers.
- The second rubber cover is much harder to get out.
Pull out the two black rubber covers using tweezers.
The second rubber cover is much harder to get out.
Step 7
- Pull out the white plastic cover by unclipping the two plastic pieces shown.
Pull out the white plastic cover by unclipping the two plastic pieces shown.
Step 8
- Pull out the speaker.
Pull out the speaker.
Step 9
Motherboard (CDMA)
- Pull out the motherboard.
- You may also now replace the bottom lower casing
Pull out the motherboard.
You may also now replace the bottom lower casing
Step 10
Lower Casing (CDMA)
- Unscrew the two screws holding the plastic speaker cover to the phone with a T5 screwdriver
Unscrew the two screws holding the plastic speaker cover to the phone with a T5 screwdriver
Step 11
- Pull off and replace the lower front casing
- The metallic grounding grid will come off when the lower front casing is removed
- Make sure to reinsert the metallic grounding unit when re-screwing the new lower bottom casing
Pull off and replace the lower front casing
The metallic grounding grid will come off when the lower front casing is removed
Make sure to reinsert the metallic grounding unit when re-screwing the new lower bottom casing
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
krisko
Member since: 01/14/2010
95 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 11-4, Forte Winter 2010
Member of Cal Poly, Team 11-4, Forte Winter 2010
CPSU-FORTE-W10S11G4
3 Members
8 Guides authored
