Difficulty

Moderate

Steps

7

Time Required

                          45 minutes

Sections

3

  • Battery
  • 2 steps
  • Upper Casing
  • 3 steps
  • Camera
  • 2 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackMotorola Razr V3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              Battery
  • Remove the back cover by pressing down the silver button.
  • Pull the cover away from the phone.

Remove the back cover by pressing down the silver button.

Pull the cover away from the phone.

1024

Step 2

  • Remove the battery by pushing down on the top and pulling it away from the phone.

Remove the battery by pushing down on the top and pulling it away from the phone.

Step 3

              Upper Casing
  • Use tweezers to pry off the four rubber screw covers from the inside face.
  • Our phone is missing the two left screw covers, be careful not to lose yours too!

Use tweezers to pry off the four rubber screw covers from the inside face.

Our phone is missing the two left screw covers, be careful not to lose yours too!

Step 4

  • Remove the four T5 Torx screws that were underneath the rubber covers.

Remove the four T5 Torx screws that were underneath the rubber covers.

Step 5

  • Use the plastic opening tool to pry the top cover away from the phone.
  • The side buttons on the phone may fall out when the top cover is separated from the phone. They can easily be put back by placing them in their original spot.

Use the plastic opening tool to pry the top cover away from the phone.

The side buttons on the phone may fall out when the top cover is separated from the phone. They can easily be put back by placing them in their original spot.

Step 6

              Camera
  • Use tweezers to flip up the ZIF tab on the camera ribbon cable socket.
  • Gently pull the camera ribbon cable out of the ZIF socket.

Use tweezers to flip up the ZIF tab on the camera ribbon cable socket.

Gently pull the camera ribbon cable out of the ZIF socket.

Step 7

  • Using a pair of tweezers gently grab and remove the camera from the phone.

Using a pair of tweezers gently grab and remove the camera from the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 8 other contributors 


                    Christian

Member since: 04/18/2013

218 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 3-46, Amido Spring 2013                        

                                                  Member of Cal Poly, Team 3-46, Amido Spring 2013 



                    CPSU-AMIDO-S13S3G46                     


                                            4 Members                     


                                            8 Guides authored