Motorola Razr Maxx Hd Rear Facing Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 minutes

Sections

Screen Removal
4 steps
Rear-Facing Camera
4 steps

Flags

BackMotorola RAZR Maxx HD
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Screen Removal

Use the Torx T5 Screwdriver to remove two 5.0 mm screws at the bottom of the phone.

Use the Torx T5 Screwdriver to remove two 5.0 mm screws at the bottom of the phone.

1024

Step 2

To remove the SIM card, use an unfolded paperclip to press down on the metal plate on the left side of the phone until it pops up.

To remove the SIM card, use an unfolded paperclip to press down on the metal plate on the left side of the phone until it pops up.

Step 3

Gently push the screen toward the top edge of the phone and tilt the screen to reveal the black flex cables.
Do NOT remove the screen all the way or the flex cables will be damaged.

Gently push the screen toward the top edge of the phone and tilt the screen to reveal the black flex cables.

Do NOT remove the screen all the way or the flex cables will be damaged.

Step 4

Release the two black ribbon flex cables by gently pulling up on the connection using the spudger. Then lift the screen to remove.
Make sure to remove the flex cables before completely removing the screen.
When reassembling, align the white bands on the edge of the screen so that a connection is made.

Release the two black ribbon flex cables by gently pulling up on the connection using the spudger. Then lift the screen to remove.

Make sure to remove the flex cables before completely removing the screen.

When reassembling, align the white bands on the edge of the screen so that a connection is made.

Step 5

              Rear-Facing Camera

Using a T5 Torx screwdriver, unscrew the two 4.0mm screws on the rear-facing camera cover.

Using a T5 Torx screwdriver, unscrew the two 4.0mm screws on the rear-facing camera cover.

Step 6

Use tweezers to remove the rear-facing camera cover.

Use tweezers to remove the rear-facing camera cover.

Step 7

Use the spudger to gently lift the rear-facing camera until it is detached from the back cover.
Release the yellow ribbon cable by lifting up on the connection to the motherboard with the spudger.

Use the spudger to gently lift the rear-facing camera until it is detached from the back cover.

Release the yellow ribbon cable by lifting up on the connection to the motherboard with the spudger.

Step 8

Use tweezers to gently remove the rear-facing camera by lifting it up off of the motherboard.

Use tweezers to gently remove the rear-facing camera by lifting it up off of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Hristo

Member since: 02/01/2015

150 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 8-40, Amido Winter 2015                        

                                                  Member of Cal Poly, Team 8-40, Amido Winter 2015 



                    CPSU-AMIDO-W15S8G40                     


                                            5 Members                     


                                            18 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team