Difficulty
Moderate
Steps
10
Time Required
Suggest a time??
Sections
2
- Phone
- 7 steps
- Speaker and Camera
- 3 steps
Flags
3
Missed a Step
Oops! This guide is currently missing some important steps.
Scenic Route
This guide’s procedure isn’t the most efficient way to get the job done, but still may be useful in some circumstances.
Better Introduction
Improve this guide by completing or revising its introduction.
BackMotorola Q700 Sidekick
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Phone
- When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.
When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.
1024
Step 2
- Turn the phone face-down. Remove the back cover, exposing the battery.
- Use the Plastic Opening Tool to pry the battery out of the phone.
Turn the phone face-down. Remove the back cover, exposing the battery.
Use the Plastic Opening Tool to pry the battery out of the phone.
Step 3
- Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.
- Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.
Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.
Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.
Step 4
- After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.
After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.
Step 5
- Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.
Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.
Step 6
- On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.
On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.
Step 7
- You should now have all of the pieces separated and disassembled for your device.
You should now have all of the pieces separated and disassembled for your device.
Step 8
Speaker and Camera
- complete dissassembly as instructed by guide
complete dissassembly as instructed by guide
Step 9
- Remove camera piece from casing
Remove camera piece from casing
Step 10
- replace with new camera piece into casing and reassemble by reversing dissemble procedure
replace with new camera piece into casing and reassemble by reversing dissemble procedure
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Rich
Member since: 04/08/2013
125 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
SUNY Cortland, Team 1-4, Getto Spring 2013
Member of SUNY Cortland, Team 1-4, Getto Spring 2013
SUNYCORT-GETTO-S13S1G4
4 Members
6 Guides authored