Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
3
- Battery
- 2 steps
- Midframe
- 2 steps
- Speaker
- 2 steps
Flags
0
BackMotorola Photon 4G MB855
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Removing the Back Cover
- Insert a plastic opening tool into the indentation at the bottom of the phone between the front and rear covers.
- Lift the back cover from the bottom and remove it from the phone.
Insert a plastic opening tool into the indentation at the bottom of the phone between the front and rear covers.
Lift the back cover from the bottom and remove it from the phone.
1024
Step 2
Removing the Battery
- Insert a plastic opening tool, or your finger, into the notch in between the sim card and the battery and lift the battery upward.
- Remove the battery from your phone.
Insert a plastic opening tool, or your finger, into the notch in between the sim card and the battery and lift the battery upward.
Remove the battery from your phone.
Step 3
Removing Screw Covers
- Remove all five screw covers with tweezers located in the picture.
Remove all five screw covers with tweezers located in the picture.
Step 4
Removing the Midframe
- Remove the 10 T4 Torx screws securing the midframe to the display assembly.
- Gently pry the midframe from the display assembly and remove it.
Remove the 10 T4 Torx screws securing the midframe to the display assembly.
Gently pry the midframe from the display assembly and remove it.
Step 5
Locating the Speaker
- Locate the speaker on the back of the midframe.
Locate the speaker on the back of the midframe.
Step 6
Removing the Speaker
- The speaker is attached to the midframe with adhesive. Remove carefully.
- Use the Metal Spudger to get between the speaker and the midframe and slowly lift the speaker upwards.
- Remove the speaker from the midframe.
The speaker is attached to the midframe with adhesive. Remove carefully.
Use the Metal Spudger to get between the speaker and the midframe and slowly lift the speaker upwards.
Remove the speaker from the midframe.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Elizabeth Lee
Member since: 10/07/2014
92 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
USF Tampa, Team 8-6, Leahy Fall 2014
Member of USF Tampa, Team 8-6, Leahy Fall 2014
USFT-LEAHY-F14S8G6
3 Members
10 Guides authored