Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes

Sections

3

  • Battery
  • 2 steps
  • Midframe
  • 2 steps
  • Motherboard
  • 2 steps

Flags

1

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackMotorola Photon 4G MB855

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing the Back Cover
  • Insert a plastic opening tool into the indentation at the bottom of the phone between the front and rear covers.
  • Lift the back cover from the bottom and remove it from the phone.

Insert a plastic opening tool into the indentation at the bottom of the phone between the front and rear covers.

Lift the back cover from the bottom and remove it from the phone.

1024

Step 2

              Removing the Battery
  • Insert a plastic opening tool, or your finger, into the notch in between the sim card and the battery and lift the battery upward.
  • Remove the battery from your phone.

Insert a plastic opening tool, or your finger, into the notch in between the sim card and the battery and lift the battery upward.

Remove the battery from your phone.

Step 3

              Removing Screw Covers
  • Remove all five screw covers with tweezers located in the picture.

Remove all five screw covers with tweezers located in the picture.

Step 4

              Removing the Midframe
  • Remove the 10 T4 Torx screws securing the midframe to the display assembly.
  • Gently pry the midframe from the display assembly and remove it.

Remove the 10 T4 Torx screws securing the midframe to the display assembly.

Gently pry the midframe from the display assembly and remove it.

Step 5

              Unclipping Display Data Cable
  • Locate the Display Data Cables
  • Use hands or plastic opening tool to carefully pry off the connectors.

Locate the Display Data Cables

Use hands or plastic opening tool to carefully pry off the connectors.

Step 6

              Removing Motherboard
  • Be careful when removing motherboard. Earpiece is connected with small wires and adhesive. Use thin metal tool to pry off before removing motherboard.
  • Use a plastic opening tool to gently pry off each section of the Motherboard.
  • Use hands to slowly and carefully remove the motherboard from the front panel assembly.

Be careful when removing motherboard. Earpiece is connected with small wires and adhesive. Use thin metal tool to pry off before removing motherboard.

Use a plastic opening tool to gently pry off each section of the Motherboard.

Use hands to slowly and carefully remove the motherboard from the front panel assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    Eddie Krause

Member since: 10/07/2014

260 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 8-6, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 8-6, Leahy Fall 2014 



                    USFT-LEAHY-F14S8G6                     


                                            3 Members                     


                                            10 Guides authored