Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes

Sections

3

  • Battery
  • 2 steps
  • Midframe
  • 2 steps
  • Headphone Jack
  • 2 steps

Flags

0

  • BackMotorola Photon 4G MB855

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing the Back Cover
  • Insert a plastic opening tool into the indentation at the bottom of the phone between the front and rear covers.
  • Lift the back cover from the bottom and remove it from the phone.

Insert a plastic opening tool into the indentation at the bottom of the phone between the front and rear covers.

Lift the back cover from the bottom and remove it from the phone.

1024

Step 2

              Removing the Battery
  • Insert a plastic opening tool, or your finger, into the notch in between the sim card and the battery and lift the battery upward.
  • Remove the battery from your phone.

Insert a plastic opening tool, or your finger, into the notch in between the sim card and the battery and lift the battery upward.

Remove the battery from your phone.

Step 3

              Removing Screw Covers
  • Remove all five screw covers with tweezers located in the picture.

Remove all five screw covers with tweezers located in the picture.

Step 4

              Removing the Midframe
  • Remove the 10 T4 Torx screws securing the midframe to the display assembly.
  • Gently pry the midframe from the display assembly and remove it.

Remove the 10 T4 Torx screws securing the midframe to the display assembly.

Gently pry the midframe from the display assembly and remove it.

Step 5

              Locating Headphone Jack
  • Locate Headphone Jack attached to Midframe.

Locate Headphone Jack attached to Midframe.

Step 6

              Removing Headphone Jack
  • Use Tweezers to gently remove Headphone Jack from the Midframe.
  • The Headphone Jack is attached with adhesive, remove carefully.

Use Tweezers to gently remove Headphone Jack from the Midframe.

The Headphone Jack is attached with adhesive, remove carefully.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Eddie Krause

Member since: 10/07/2014

260 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 8-6, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 8-6, Leahy Fall 2014 



                    USFT-LEAHY-F14S8G6                     


                                            3 Members                     


                                            10 Guides authored