Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
1
- Power and Volume flex cable
- 8 steps
Flags
2
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackMotorola Moto X 2nd Generation
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Power and Volume flex cable
- Remove SIM card tray.
Remove SIM card tray.
1024
Step 2
- Remove back cover.
Remove back cover.
Step 3
- Remove those two rubber cover.
Remove those two rubber cover.
Step 4
- Release power connecting flex connector and battery connector.
Release power connecting flex connector and battery connector.
Step 5
- Twist off all 18 black torx screws and remove the middle housing from front assembly.
Twist off all 18 black torx screws and remove the middle housing from front assembly.
Step 6
- Release power flex connector from connecting flex.
Release power flex connector from connecting flex.
Step 7
- Remove securing bracket and side buttons.
Remove securing bracket and side buttons.
Step 8
- Pry up and remove the power flex.
Pry up and remove the power flex.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
10 other people completed this guide.
Author
with 2 other contributors
Sophia
Member since: 03/25/2014
43,666 Reputation
62 Guides authored
Badges:
26
+23 more badges
Carlo Petermann - Jun 29, 2016
Reply
Followed your instructions. Volume works, power button still no go.
It clicks fine, but nothing happens..
sagar bhale - Jul 6, 2017
I have the same issue. Any ideas? Resolutions?
Clément Masci - Jul 29, 2017
Reply
The screwdriver is T4 on my european moto X 2014, not T3!!