Motorola Moto X 2Nd Generation Logo Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

• Logo
• 4 steps

Flags

2

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackMotorola Moto X 2nd Generation

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Logo               

• Remove SIM card tray.

Remove SIM card tray.

1024

Step 2

• Use the eject pin to open a gap and place a guitar pick into the gap.

Use the eject pin to open a gap and place a guitar pick into the gap.

Step 3

• Slide the guitar pick to cut the adhesive sticker and peel off the soft back cover.

Slide the guitar pick to cut the adhesive sticker and peel off the soft back cover.

Step 4

• Twist off three screws, pry up the securing bracket and remove the logo finally.

Twist off three screws, pry up the securing bracket and remove the logo finally.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Sophia                     

Member since: 03/25/2014

43,666 Reputation

                                      62 Guides authored                  



                       Badges:
                       26







                                                        +23 more badges                           

Jeff Caauwe - Jun 10, 2015

Reply

So apparently, this phone was supposed to have a fingerprint scanner. To anyone who has done this repair, I’m sure you’re as confused as me as to why there is a flex cable leading to the “M” logo with nothing attached. My though is that’s where the scanner was going to go, and it just never happened, which also explains why the iconic Motorola M dimple is a separate part, compared to the old Moto X and the Gs and Es, which was part of the back plastic cover.

Niall Murray - Aug 18, 2015

Reply

Where can you get the replacement part? I’m finding it difficult.