Difficulty
Easy
Steps
5
Time Required
20 - 25 minutes
Sections
2
- Screen
- 4 steps
- Speaker
- 1 step
Flags
0
BackMotorola Moto G7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before beginning, make sure the device is unplugged from any chargers or headphones. Before starting, grab suggested tools and a new speaker.
What you need
Step 1
Screen
- Use the iFixit opening tools to gently wedge the front screen from the rest of the device.
- Try to focus on the corners to make it easier to insert and use the iFixit opening picks.
- It is also recommended to use the iOpener or a heat gun to weaken the adhesive that holds the edges of the screen down.
- The screen is glass, so when using force to lift the screen, be cautious of cracked glass and stray shards of glass coming off.
- You have to be extra careful to dig deep enough, so you lift the entire screen unit!
Use the iFixit opening tools to gently wedge the front screen from the rest of the device.
Try to focus on the corners to make it easier to insert and use the iFixit opening picks.
It is also recommended to use the iOpener or a heat gun to weaken the adhesive that holds the edges of the screen down.
The screen is glass, so when using force to lift the screen, be cautious of cracked glass and stray shards of glass coming off.
You have to be extra careful to dig deep enough, so you lift the entire screen unit!
1024
Step 2
- Excessive glass and adhesive around the edges should be removed with the spudger.
- The glass is black and may blend in with edges of the device. Be cautious using bare hands when moving the device.
Excessive glass and adhesive around the edges should be removed with the spudger.
The glass is black and may blend in with edges of the device. Be cautious using bare hands when moving the device.
Step 3
- Remove three 2.7mm T3 Torx screws from the metal piece to the right of the battery.
Remove three 2.7mm T3 Torx screws from the metal piece to the right of the battery.
Step 4
- Use a spudger to gently take off the metal piece that was held down by the screws.
- A second metal piece is held under the first. This can also be popped off by using the spudger and nudging it under the metal piece connected to the band.
Use a spudger to gently take off the metal piece that was held down by the screws.
A second metal piece is held under the first. This can also be popped off by using the spudger and nudging it under the metal piece connected to the band.
Step 5
Speaker
- Remove three 3.7mm T3 Torx screws from the bottom of the phone.
- Use the spudger to gently lift the speaker out of the phone.
Remove three 3.7mm T3 Torx screws from the bottom of the phone.
Use the spudger to gently lift the speaker out of the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Peter Nelson
Member since: 01/23/2020
724 Reputation
3 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team S19-G6, White Winter 2020
Member of Cal Poly, Team S19-G6, White Winter 2020
CPSU-WHITE-W20S19G6
4 Members
20 Guides authored
Kevin Lettelleir - Nov 30, 2020
Reply
Could you perhaps offer any advice on how to source one of these bottom-ported speakers?
