Difficulty
Easy
Steps
8
Time Required
40 - 45 minutes
Sections
2
- Screen
- 4 steps
- Front Camera
- 4 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackMotorola Moto G7 Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the Screen
- Insert an opening tool pick under the screen, starting at the top of the phone.
- Slide the pick around the entire perimeter of the display to break the adhesive.
- There is a cable on the right side of the phone (the side with the volume buttons), which connects the screen to the rest of the phone. Be careful not to damage this cable.
- Once enough adhesive has been removed, you should be able to separate the screen by gently lifting it from the left side of the phone.
- While not necessary, applying a gentle heat to the edges of the display with a heat gun or iOpener will weaken the adhesive.
Insert an opening tool pick under the screen, starting at the top of the phone.
Slide the pick around the entire perimeter of the display to break the adhesive.
There is a cable on the right side of the phone (the side with the volume buttons), which connects the screen to the rest of the phone. Be careful not to damage this cable.
Once enough adhesive has been removed, you should be able to separate the screen by gently lifting it from the left side of the phone.
While not necessary, applying a gentle heat to the edges of the display with a heat gun or iOpener will weaken the adhesive.
1024
Step 2
Remove the Display Cable Cover
- Remove the three 2.7 mm screws that surround the base of the display cable using the Torx T5 screwdriver.
- Gently remove the metal piece that covers the base of the display cable.
Remove the three 2.7 mm screws that surround the base of the display cable using the Torx T5 screwdriver.
Gently remove the metal piece that covers the base of the display cable.
Step 3
- Use the pointed end of the spudger to lift the metal casing where circled.
Use the pointed end of the spudger to lift the metal casing where circled.
Step 4
Separate the Display From the Phone
- Underneath this metal piece is the base of the cable. Use a spudger to vertically lift the connection out of its port.
Underneath this metal piece is the base of the cable. Use a spudger to vertically lift the connection out of its port.
Step 5
Front Camera
- Remove the eleven screws with the T5 Torx screwdriver.
Remove the eleven screws with the T5 Torx screwdriver.
Step 6
- Remove the camera housing plate with the opening tool.
Remove the camera housing plate with the opening tool.
Step 7
- Disconnect the three highlighted connectors as seen in the diagram using the opening tools.
Disconnect the three highlighted connectors as seen in the diagram using the opening tools.
Step 8
- Pry the motherboard away from the frame of the phone using the opening tools.
- Do not completely remove the motherboard from the device.
- Remove the camera from the motherboard.
Pry the motherboard away from the frame of the phone using the opening tools.
Do not completely remove the motherboard from the device.
Remove the camera from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Jackson Anthony All
Member since: 02/15/2021
109 Reputation
1 Guide authored
Badges:
2
Team
The Citadel Military College of South Carolina, Team S1-G11, Eggleston Spring 2021
Member of The Citadel Military College of South Carolina, Team S1-G11, Eggleston Spring 2021
CMCSC-EGGLESTON-S21S1G11
3 Members
9 Guides authored