Motorola Moto G7 Play Charging Port Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          25 minutes            

Sections

2

• Back Cover
• 3 steps
• Charging Port
• 4 steps

Flags

0

• BackMotorola Moto G7 Play

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Turn off your device before you begin.
• Use the iFixit pick to break the adhesive around the back case.
• Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you’re using the iOpener, please review the instructions for proper use.

Turn off your device before you begin.

Use the iFixit pick to break the adhesive around the back case.

Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you’re using the iOpener, please review the instructions for proper use.

1024

Step 2

• Detach the back case from the phone.
• Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

Detach the back case from the phone.

Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

Step 3

• Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

Step 4

              Charging Port               

• Remove the six 3.2 mm screws from the charging port assembly cover with a Phillips #00 screwdriver.

Remove the six 3.2 mm screws from the charging port assembly cover with a Phillips #00 screwdriver.

Step 5

• Using the iFixit opening tool, carefully pry up the charging port assembly cover.

Using the iFixit opening tool, carefully pry up the charging port assembly cover.

Step 6

• Using an iFixit opening tool, detach the cables from the charging port assembly.

Using an iFixit opening tool, detach the cables from the charging port assembly.

Step 7

• Using the iFixit opening tool, carefully pry up the charging port assembly.

Using the iFixit opening tool, carefully pry up the charging port assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Monserath Casillas                     

Member since: 02/10/2020

1,101 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team S7-G4, Regan Winter 2020                        

                                                  Member of Cal Poly, Team S7-G4, Regan Winter 2020 



                    CPSU-REGAN-W20S7G4                     


                                            5 Members                     


                                            12 Guides authored                     

Travis Brubaker - Apr 14, 2020

Reply

Xt1952-4 is the same. Replaced the charge port due to microphone failing.