Difficulty
Moderate
Steps
6
Time Required
30 minutes - 1 hour
Sections
1
- Screen
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackMotorola Moto G4 Play
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove back plate
- Remove back plate starting with this tab
Remove back plate starting with this tab
1024
Step 2
- remove battery
- remove SD card and sim card
remove battery
remove SD card and sim card
Step 3
remove screws and inner back plate
- remove 16 phillips 00 screws
- don’t forget this one hiding underneath this sticker
- no screw here
- remove the inner back plate
remove 16 phillips 00 screws
don’t forget this one hiding underneath this sticker
no screw here
remove the inner back plate
Step 4
Remove the motherboard
- disconnect antenna cable from motherboard with a spudger.
- disconnect screen and digitiser cables with a spudger.
- remove rear facing camera with a spudger
- remove phillips 00 screw
- Remove motherboard. this cable is still connected, you must disconnect it as you remove the motherboard.
- There is a cable attached to the bottom of the motherboard, be careful when removing it
disconnect antenna cable from motherboard with a spudger.
disconnect screen and digitiser cables with a spudger.
remove rear facing camera with a spudger
remove phillips 00 screw
Remove motherboard. this cable is still connected, you must disconnect it as you remove the motherboard.
There is a cable attached to the bottom of the motherboard, be careful when removing it
Step 5
Remove USB accessory board
- disconnect antenna and data cable
- remove philips 00 screws
- Remove usb board and vibrator together.
- vibrator is attached to usb board from the bottom, be careful and remove them together to prevent damage.
disconnect antenna and data cable
remove philips 00 screws
Remove usb board and vibrator together.
vibrator is attached to usb board from the bottom, be careful and remove them together to prevent damage.
Step 6
Remove remaining components from screen assembly
- Peel off black sticker under battery compartment.
- peel off data cable
- remove antenna wire
- remove speaker
Peel off black sticker under battery compartment.
peel off data cable
remove antenna wire
remove speaker
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
Author
with 1 other contributor
Michael Cottone
Member since: 09/09/2017
903 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Cottone Computing
Member of Cottone Computing
Business
1 Member
2 Guides authored
lilmizzipf - Aug 7, 2018
Reply
what if the new screen does not turn on or light up when you turn the phone on??? what part is causing that issue??
jrhooker - Aug 16, 2018
Reply
I’ve just wrapped up an abortive attempt to replace the screen on a friend’s G4 Play. It was aborted because the screen I bought off of ebay has only one digitizer connection on the upper left of the screen but my friend’s model has the two connections pictured in step 4 of this procedure. I can’t find an XT1601 screen on ebay or aliexpress or anywhere else that sports the twin connectors. What model of phone was this? Any clues on how to track this down?
benjamin linne - Jan 9, 2019
Reply
@jrhooker that’s the button cable