Motorola Moto G 1St Generation Headphone Jack Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          15 - 20 minutes            

Sections

2

• Motorola Moto G XT1034 Back Case and Battery Cover Disassembly
• 3 steps
• Headphone Jack
• 1 step

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackMotorola Moto G (1st Generation)

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Rear Panel               

• Before you start following any of the steps of this guide, completely turn the device off.
• Take the plastic back cover off by either using a plastic Pry tool or simply using your hands. Start from the bottom by the charging port

Before you start following any of the steps of this guide, completely turn the device off.

Take the plastic back cover off by either using a plastic Pry tool or simply using your hands. Start from the bottom by the charging port

1024

Step 2

              Removing the Screws               

• Unscrew the 3.5mm screws, total of 14, located on the back protective cover by using a T5 Torx screwdriver.

Unscrew the 3.5mm screws, total of 14, located on the back protective cover by using a T5 Torx screwdriver.

Step 3

              Removing the Battery Cover               

• Use a plastic opening tool to remove the protective cover.
• Carefully work the plastic tool around all the edges of the phone.
• The protective cover holds the Volume and the Home buttons which might fall off the assembly when the cover is removed.

Use a plastic opening tool to remove the protective cover.

Carefully work the plastic tool around all the edges of the phone.

The protective cover holds the Volume and the Home buttons which might fall off the assembly when the cover is removed.

Step 4

              Removing the Headphone Jack               

• Use the plastic opening tool to remove the Headphone Jack from the protective cover and replace it.

Use the plastic opening tool to remove the Headphone Jack from the protective cover and replace it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Radostin Lobodov                     

Member since: 10/16/2014

2,883 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       UMass Dartmouth, Team 5-7, Vijaybhaskar Fall 2014                        

                                                  Member of UMass Dartmouth, Team 5-7, Vijaybhaskar Fall 2014 



                    UMASSD-VIJAYBHASKAR-F14S5G7                     


                                            3 Members                     


                                            8 Guides authored