Difficulty

Moderate

Steps

9

Time Required

                          15 - 30 minutes

Sections

3

  • Back Cover
  • 5 steps
  • Battery
  • 1 step
  • Loudspeaker
  • 3 steps

Flags

0

  • BackMotorola Moto E6 Plus

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Unclip the back cover
  • Use an opening tool or your fingernail to pry the back cover away from the frame using the notch at the bottom right corner.

Use an opening tool or your fingernail to pry the back cover away from the frame using the notch at the bottom right corner.

1024

Step 2

              Unclip the right edge
  • Use an opening tool or your fingernail to release the clips on the right edge by sliding up and around the top right corner.

Use an opening tool or your fingernail to release the clips on the right edge by sliding up and around the top right corner.

Step 3

              Unclip the top edge
  • Continue to slide the opening tool or your fingernail across the top edge to release the clips securing the back cover to the frame.

Continue to slide the opening tool or your fingernail across the top edge to release the clips securing the back cover to the frame.

Step 4

              Unclip the left edge
  • Continue to slide the opening tool or your fingernail down the left edge to release the clips.

Continue to slide the opening tool or your fingernail down the left edge to release the clips.

Step 5

              Remove the back cover
  • Remove the back cover.

Remove the back cover.

Step 6

              Remove the battery
  • Use a spudger or your fingernail to pry the battery up using the notch near the bottom right corner.
  • Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.
  • Remove the battery.

Use a spudger or your fingernail to pry the battery up using the notch near the bottom right corner.

Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.

Remove the battery.

Step 7

              Remove the screws
  • Use a Torx T3 driver to remove the three 3.6 mm-long screws securing the loudspeaker to the frame.
  • Use a Phillips screwdriver to remove the four 3.1 mm-long screws.

Use a Torx T3 driver to remove the three 3.6 mm-long screws securing the loudspeaker to the frame.

Use a Phillips screwdriver to remove the four 3.1 mm-long screws.

Step 8

              Unclip the loudspeaker
  • Use a spudger to pry up the loudspeaker from the frame.
  • If you are having trouble releasing the clips securing the loudspeaker to the frame, use a spudger to pry around the loudspeaker to loosen it.

Use a spudger to pry up the loudspeaker from the frame.

If you are having trouble releasing the clips securing the loudspeaker to the frame, use a spudger to pry around the loudspeaker to loosen it.

Step 9

              Remove the loudspeaker
  • Remove the loudspeaker.

Remove the loudspeaker.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Motorola Moto E6 Plus Answers community for help.

Cancel: I did not complete this guide.

Author

                    Robert Boyd

Member since: 02/01/2021

21,303 Reputation

                                      92 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges