Featured

Featured Guide

Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes

Sections

2

  • Back Cover
  • 5 steps
  • Battery
  • 1 step

Flags

1

This guide has been found to be exceptionally cool by the iFixit staff.

  • BackMotorola Moto E6 Plus

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

For your safety, discharge the battery below 25% before disassembling your phone. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.

Step 1

              Unclip the back cover
  • Use an opening tool or your fingernail to pry the back cover away from the frame using the notch at the bottom right corner.

Use an opening tool or your fingernail to pry the back cover away from the frame using the notch at the bottom right corner.

1024

Step 2

              Unclip the right edge
  • Use an opening tool or your fingernail to release the clips on the right edge by sliding up and around the top right corner.

Use an opening tool or your fingernail to release the clips on the right edge by sliding up and around the top right corner.

Step 3

              Unclip the top edge
  • Continue to slide the opening tool or your fingernail across the top edge to release the clips securing the back cover to the frame.

Continue to slide the opening tool or your fingernail across the top edge to release the clips securing the back cover to the frame.

Step 4

              Unclip the left edge
  • Continue to slide the opening tool or your fingernail down the left edge to release the clips.

Continue to slide the opening tool or your fingernail down the left edge to release the clips.

Step 5

              Remove the back cover
  • Remove the back cover.

Remove the back cover.

Step 6

              Remove the battery
  • Use a spudger or your fingernail to pry the battery up using the notch near the bottom right corner.
  • Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.
  • Remove the battery.

Use a spudger or your fingernail to pry the battery up using the notch near the bottom right corner.

Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.

Remove the battery.

To reassemble your device, follow these instructions in reverse order.

For optimal performance, calibrate your newly installed battery after completing this guide.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Motorola Moto E6 Plus Answers community for help.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                    Robert Boyd

Member since: 02/01/2021

21,303 Reputation

                                      92 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Ken Mills - Jan 22, 2022

Reply

Well done, excellent step by step procedure. Very easy to follow, in fact the best I have ever come across.

As I have previously stated the easiest and best step by step procedure I have ever come across. Well done author.