Motorola Moto E4 Front Facing Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          8 minutes

Sections

Battery
1 step
Motherboard Cover
2 steps
Front Facing Camera
1 step

Flags

BackMotorola Moto E4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Remove the rear cover

Before removing the battery, power off your Moto E4.
Remove the plastic cover by gently prying it up from the notch at the bottom right corner of the phone.
With the phone face down, lift the battery up by the labeled tab and remove it from the device.

Before removing the battery, power off your Moto E4.

Remove the plastic cover by gently prying it up from the notch at the bottom right corner of the phone.

With the phone face down, lift the battery up by the labeled tab and remove it from the device.

1024

Step 2

              Motherboard Cover

Remove all nine 4mm screws from the top plastic cover with a Phillips driver.

Remove all nine 4mm screws from the top plastic cover with a Phillips driver.

Step 3

Gently pry up the plastic cover from the gap between it and the phone edge.
Start on the right side as indicated by the first picture.
Continue prying around the rest of the cover in a counter clockwise path.
Once loose, remove the plastic cover from the phone.

Gently pry up the plastic cover from the gap between it and the phone edge.

Start on the right side as indicated by the first picture.

Continue prying around the rest of the cover in a counter clockwise path.

Once loose, remove the plastic cover from the phone.

Step 4

              Front Facing Camera

Detach the front facing cable ribbon connector using an iFixit opening tool and lift the camera out of position.
To completely remove the front facing camera from the phone, the copper colored adhesive must be torn. The camera will still with the adhesive removed, but there may be unknown side effects.

Detach the front facing cable ribbon connector using an iFixit opening tool and lift the camera out of position.

To completely remove the front facing camera from the phone, the copper colored adhesive must be torn. The camera will still with the adhesive removed, but there may be unknown side effects.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Nate Tjepkema

Member since: 01/24/2019

1,179 Reputation

                                      7 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team S2-G4, White Winter 2019                        

                                                  Member of Cal Poly, Team S2-G4, White Winter 2019 



                    CPSU-WHITE-W19S2G4                     


                                            4 Members                     


                                            22 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team