Motorola Krzr K1M Keyboard Repalcement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          15 - 30 minutes            

Sections

1

• Keypad
• 4 steps

Flags

0

• BackMotorola Krzr K1m

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keypad               

• Remove the battery with your fingers by pulling the battery from the top corners labeled “Pull Here” located on the left and right side of the top of the battery.
• Remove the battery.

Remove the battery with your fingers by pulling the battery from the top corners labeled “Pull Here” located on the left and right side of the top of the battery.

Remove the battery.

1024

Step 2

• To begin detaching the battery dock, unscrew the 4 black screws on each corner of the phone with the T5 Torx Screwdriver.
• Lift up the battery dock where the hinges are located. Carefully insert the T5 Torx Screwdriver in between the battery dock and the back plate of the battery. (See the picture to locate the hinges)
• Remove the battery dock by popping it up with The Spudger.

To begin detaching the battery dock, unscrew the 4 black screws on each corner of the phone with the T5 Torx Screwdriver.

Lift up the battery dock where the hinges are located. Carefully insert the T5 Torx Screwdriver in between the battery dock and the back plate of the battery. (See the picture to locate the hinges)

Remove the battery dock by popping it up with The Spudger.

Step 3

• To remove the chip board, first unplug the flex cable from the logic board with tweezers.
• Lift up the logic board from the bottom flip with your fingers.
• Remove the logic board.

To remove the chip board, first unplug the flex cable from the logic board with tweezers.

Lift up the logic board from the bottom flip with your fingers.

Remove the logic board.

Step 4

• Gently pop off the keypad with your fingers.
• Once the keypad is removed, follow all of the steps in reverse order to replace the old keypad with the new keypad.

Gently pop off the keypad with your fingers.

Once the keypad is removed, follow all of the steps in reverse order to replace the old keypad with the new keypad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    Jennifer Hudiono                     

Member since: 01/13/2010

42 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 11-1, Forte Winter 2010                        

                                                  Member of Cal Poly, Team 11-1, Forte Winter 2010 



                    CPSU-FORTE-W10S11G1                     


                                            5 Members                     


                                            6 Guides authored