Difficulty

Moderate

Steps

5

Time Required

                          20 minutes

Sections

1

  • battery
  • 5 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackMotorola g stylus

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              remove  the sims card and tray
  • Use your sim card eject tool to remove the sim card and tray.

Use your sim card eject tool to remove the sim card and tray.

1024

Step 2

              remove stylus
  • Remove your stylus pen from the phone.

Remove your stylus pen from the phone.

Step 3

              removing the back of your phone
  • Using your heat gun or a hairdryer heat the back of the phone to loosen up the adhesive.
  • Now using your opening devices go along the edge of the phone slow and easy prying along the edges till they’re loose.
  • As you’re lifting up the back of your phone be sure you watch out for the fingerprint scanner, just keep it pushed down while you’re lifting up the back of the phone .

Using your heat gun or a hairdryer heat the back of the phone to loosen up the adhesive.

Now using your opening devices go along the edge of the phone slow and easy prying along the edges till they’re loose.

As you’re lifting up the back of your phone be sure you watch out for the fingerprint scanner, just keep it pushed down while you’re lifting up the back of the phone .

Step 4

              top and botttom inside covers
  • Here you will have 15 t4 screws on top and bottom to take out but be careful with the top cover because the finger sensor runs under it. You don’t want to rip that

Here you will have 15 t4 screws on top and bottom to take out but be careful with the top cover because the finger sensor runs under it. You don’t want to rip that

Step 5

              Removing the battery
  • Here we need to be careful that we don’t damage the battery, so unhook the battery and its flex cable. Then carefully get one corner of the battery lifted up to where you can get a good grip to pull on it. You will have to pull it slower so you don’t damage the battery once that is done you made it.
  • New line.

Here we need to be careful that we don’t damage the battery, so unhook the battery and its flex cable. Then carefully get one corner of the battery lifted up to where you can get a good grip to pull on it. You will have to pull it slower so you don’t damage the battery once that is done you made it.

New line.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Trent Weaver

Member since: 09/16/2020

178 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

0% 100% - Oct 28, 2022

Reply

Yessir, you the man bro