Difficulty

Moderate

Steps

5

Time Required

                          5 - 6 minutes

Sections

2

  • Battery
  • 2 steps
  • Motherboard
  • 3 steps

Flags

1

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

  • BackMotorola Entice w766

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Slide the tab off the back of the device.

Slide the tab off the back of the device.

1024

Step 2

  • Use the tab located at the top of the battery to release the battery.

Use the tab located at the top of the battery to release the battery.

Step 3

              Motherboard
  • The six screws need to be taken out with any conventional screw driver tool.
  • You will have to unscrew the six 5.31 mm Star Head #5 screws with the appropriate six star bit.
  • There should be six screws removed from the casing after completion.

The six screws need to be taken out with any conventional screw driver tool.

You will have to unscrew the six 5.31 mm Star Head #5 screws with the appropriate six star bit.

There should be six screws removed from the casing after completion.

Step 4

  • First you will need to locate the lip on the left side of the device.
  • Next you will insert the black spudger firmly into side opening to loosen the casing.
  • Using the blue pry tool gently remove the black and silver casing.
  • The motherboard should then be exposed after removal.

First you will need to locate the lip on the left side of the device.

Next you will insert the black spudger firmly into side opening to loosen the casing.

Using the blue pry tool gently remove the black and silver casing.

The motherboard should then be exposed after removal.

Step 5

  • Remove the flex cable with a pair of tweezers.
  • Be gentle with the flex cable as not to break the connecting wire.
  • Now use a spudger or pry tool to place firmly under the motherboard.
  • After creating clearance with the spudging device grab and remove the motherboard with a clamping tool or hand.
  • Look at the motherboard for scorches or loose pieces which could indicate damage.
  • Refer to the troubleshooting page for further advice to replace the motherboard.

Remove the flex cable with a pair of tweezers.

Be gentle with the flex cable as not to break the connecting wire.

Now use a spudger or pry tool to place firmly under the motherboard.

After creating clearance with the spudging device grab and remove the motherboard with a clamping tool or hand.

Look at the motherboard for scorches or loose pieces which could indicate damage.

Refer to the troubleshooting page for further advice to replace the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Aalan Miranda

Member since: 09/29/2016

210 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI-Harley-F16S2G4                        

                                                  Member of IUPUI-Harley-F16S2G4 



                    Community                     


                                            4 Members                     


                                            2 Guides authored