Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
2
- Rear Case
- 2 steps
- Dual LED Flash Board
- 1 step
Flags
0
BackMotorola Droid Turbo
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.
Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.
1024
Step 2
- Use a plastic opening tool to pry the rear case off of the rest of the device.
- Remove the rear case.
- The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.
Use a plastic opening tool to pry the rear case off of the rest of the device.
Remove the rear case.
The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.
Step 3
Dual LED Flash Board
- Use a Jimmy to separate the dual LED flash board from the rear case.
- The board is secured with some light adhesive, so some force may be required.
Use a Jimmy to separate the dual LED flash board from the rear case.
The board is secured with some light adhesive, so some force may be required.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
Geoff Wacker
Member since: 09/30/2013
87,546 Reputation
89 Guides authored
Badges:
44
+41 more badges
Daniel Gomes - Jul 18, 2017
Reply
Gostaria se possível alguem tenha o manual de serviço do Moto maxx XT 1225 ou 1254. Porf favor , ddani8260@gmail.com