Motorola Droid Razr Maxx Camera Cover Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 10 minutes

Sections

Camera Cover
4 steps

Flags

BackMotorola Droid RAZR MAXX
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Camera Cover

Remove the SIM card.
Remove the microSD card.
Insert the plastic opening tool between the back cover and the front piece of the case, freeing the plastic clips between the phone.
Do this along the back right side of the phone cover until you reach the top.

Remove the SIM card.

Remove the microSD card.

Insert the plastic opening tool between the back cover and the front piece of the case, freeing the plastic clips between the phone.

Do this along the back right side of the phone cover until you reach the top.

1024

Step 2

Use the plastic opening tool to carefully work your way around the top of the phone, freeing the plastic clips.
Be cautious when using the tool around the top of the device because the plastic case is very thin and could easily be cracked or snapped.
Continue using the tool and pry down the remaining side and the bottom of the phone.

Use the plastic opening tool to carefully work your way around the top of the phone, freeing the plastic clips.

Be cautious when using the tool around the top of the device because the plastic case is very thin and could easily be cracked or snapped.

Continue using the tool and pry down the remaining side and the bottom of the phone.

Step 3

With all the plastic clips released, pull away the back cover from the phone to remove it.
The back cover is attached to the battery with a large amount of adhesive. Some force may be required to pull the back cover from the phone.
The back cover is very durable and will not break from some bending or pulling.

With all the plastic clips released, pull away the back cover from the phone to remove it.

The back cover is attached to the battery with a large amount of adhesive. Some force may be required to pull the back cover from the phone.

The back cover is very durable and will not break from some bending or pulling.

Step 4

Looking at the top rectangular hump where the camera is located, use the plastic opening tool to remove the camera cover.
Using the plastic opening tool, apply pressure into any surrounding crease of the camera cover to remove it.

Looking at the top rectangular hump where the camera is located, use the plastic opening tool to remove the camera cover.

Using the plastic opening tool, apply pressure into any surrounding crease of the camera cover to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Govind

Member since: 10/08/2014

130 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       USF Tampa, Team 14-6, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 14-6, Leahy Fall 2014 



                    USFT-LEAHY-F14S14G6                     


                                            4 Members                     


                                            10 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team