Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Back Cover
- 3 steps
Flags
0
BackMotorola Droid RAZR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Insert a plastic opening tool between the back cover and rear case at the lower left edge of the back cover.
- Pry the back cover up with the plastic opening tool to free the plastic clips.
- Continue prying along the left edge of the back cover towards the top of the phone.
Insert a plastic opening tool between the back cover and rear case at the lower left edge of the back cover.
Pry the back cover up with the plastic opening tool to free the plastic clips.
Continue prying along the left edge of the back cover towards the top of the phone.
1024
Step 2
- Work the plastic opening tool across the top of the back case to free the plastic clips.
- The top edge of the back case is very thin. Pry carefully to avoid cracking or snapping it.
- Continue prying down the right side of the back cover to free the remaining clips.
Work the plastic opening tool across the top of the back case to free the plastic clips.
The top edge of the back case is very thin. Pry carefully to avoid cracking or snapping it.
Continue prying down the right side of the back cover to free the remaining clips.
Step 3
- Pull the back cover away from the phone to remove it.
- The back cover is attached to the battery with a generous amount of adhesive, so you may have to use quite a bit of force to separate the two pieces.
- The battery must remain in the phone and not come off with the back cover or you will break the power lead.
- Since the back cover is made of Kevlar, it can handle a fair amount of twisting and tugging without breaking.
Pull the back cover away from the phone to remove it.
The back cover is attached to the battery with a generous amount of adhesive, so you may have to use quite a bit of force to separate the two pieces.
The battery must remain in the phone and not come off with the back cover or you will break the power lead.
Since the back cover is made of Kevlar, it can handle a fair amount of twisting and tugging without breaking.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 3 other contributors
David Hodson
Member since: 04/13/2010
147,700 Reputation
127 Guides authored
Badges:
53
+50 more badges