Motorola Droid Pro Sd Card Sim Card Pcb Board Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

2

• Battery
• 2 steps
• SD Card/SIM Card PCB Board
• 3 steps

Flags

0

• BackMotorola Droid Pro

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the back cover using the thumb tab located on the bottom of the phone.

Remove the back cover using the thumb tab located on the bottom of the phone.

1024

Step 2

• Remove the battery using the thumb tab.

Remove the battery using the thumb tab.

Step 3

              SD Card/SIM Card PCB Board               

• Using a T4 Torx driver, remove the eight 4 mm back panel screws.

Using a T4 Torx driver, remove the eight 4 mm back panel screws.

Step 4

• Use a plastic opening tool to open the phone along the sides between the front panel and the chrome trim.
• It is held together by small clips that lock in. You may have to use extra force to unlock them.
• Go around on all sides of the phone, unlocking the clips. Then pull the back panel off.

Use a plastic opening tool to open the phone along the sides between the front panel and the chrome trim.

It is held together by small clips that lock in. You may have to use extra force to unlock them.

Go around on all sides of the phone, unlocking the clips. Then pull the back panel off.

Step 5

• Gently lift the SD & SIM card board (PCB) as shown.
• There is a ribbon cable attached underneath. Gently pull the PCB board away from the phone and it will detach easily.

Gently lift the SD & SIM card board (PCB) as shown.

There is a ribbon cable attached underneath. Gently pull the PCB board away from the phone and it will detach easily.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Kyle Shays                     

Member since: 10/28/2015

836 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       UMass Dartmouth, Team 1-6, Miles Fall 2015                        

                                                  Member of UMass Dartmouth, Team 1-6, Miles Fall 2015 



                    UMASSD-MILES-F15S1G6                     


                                            3 Members                     


                                            12 Guides authored                     

lisa marie - Jun 12, 2018

Reply

Does the replacement board have to be from the same phone or does any sim board work from any phone as long as it’s 3g