Difficulty
Moderate
Steps
4
Time Required
15 - 20 minutes
Sections
2
- Back Case
- 2 steps
- Front screen
- 2 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackMotorola Droid Mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Back Case
- Pull out the volume keys using the iFixit opening tool.
Pull out the volume keys using the iFixit opening tool.
1024
Step 2
- Pry off the back case gently using the iFixit opening tool.
- Make sure to go around the entire perimeter of the case.
Pry off the back case gently using the iFixit opening tool.
Make sure to go around the entire perimeter of the case.
Step 3
Front screen
- Use the T5 screw head to unscrew the 9 silver screws from the housing frame. Carefully separate the housing frame from the motherboard.
Use the T5 screw head to unscrew the 9 silver screws from the housing frame. Carefully separate the housing frame from the motherboard.
Step 4
- Carefully use the tweezers to separate the motherboard from the screen.
Carefully use the tweezers to separate the motherboard from the screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 2 other contributors
Alec Fales
Member since: 10/08/2014
337 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 9-2, Leahy Fall 2014
Member of USF Tampa, Team 9-2, Leahy Fall 2014
USFT-LEAHY-F14S9G2
3 Members
5 Guides authored
robertanthonycastillo - Dec 31, 2015
Reply
This guide is inaccurate in essentially every step.
A few examples:
there are 13 screws to remove the back housing
an additional 2 screws to remove the motherboard
fails to mention transferring power button and ear speaker
Nate Rawson - Jan 17, 2016
Reply
Lee - Mar 17, 2017
Reply
Horrible guide. Change the title to “how to partially remove screen”
rbol - Aug 5, 2019
Reply
I used the guide below to replace/re-attach the LCD and digitizer into the front frame. Sat the phone face down on a paper towel with books on it, while on a 3d printer bed heated to 80 degrees C, for total of about 20 minutes (IR thermometer measured screen/frame at around 65C). Will see how well this holds up…
iPhone Display Adhesive Replacement