Difficulty
Easy
Steps
8
Time Required
30 minutes
Sections
1
- LCD
- 8 steps
Flags
4
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackMotorola Droid Bionic
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
LCD
- Remove the back battery cover.
Remove the back battery cover.
1024
Step 2
- Remove the battery
Remove the battery
Step 3
- Remove the 11 T4 Torx Screws
- Next, remove the information sticker.
Remove the 11 T4 Torx Screws
Next, remove the information sticker.
Step 4
- Using a plastic removal tool, work around the edges of the back housing.
- Lift off the back housing.
Using a plastic removal tool, work around the edges of the back housing.
Lift off the back housing.
Step 5
- Remove the two silver T4 screws securing the SIM tray.
- Carefully lift the SIM tray to disconnect it from the board.
- Carefully remove the plastic spacer beneath by lifting gently in the center with a plastic removal tool.
- Then, using a plastic removal tool, disconnect the speaker & front facing camera assembly from the board. The speaker is attached with adhesive, so be careful not to rip the flex cable.
Remove the two silver T4 screws securing the SIM tray.
Carefully lift the SIM tray to disconnect it from the board.
Carefully remove the plastic spacer beneath by lifting gently in the center with a plastic removal tool.
Then, using a plastic removal tool, disconnect the speaker & front facing camera assembly from the board. The speaker is attached with adhesive, so be careful not to rip the flex cable.
Step 6
- Disconnect the 2 digitizer connectors using a plastic removal tool.
- Then disconnect the LCD connector
Disconnect the 2 digitizer connectors using a plastic removal tool.
Then disconnect the LCD connector
Step 7
- The board is now free from all connections. Carefully lift from the top and remove the board.
The board is now free from all connections. Carefully lift from the top and remove the board.
Step 8
- Carefully peel the two flex cables from the back housing of the LCD. Be exceptionally careful during this process, as those flex cables can be easily ripped.
- With the flex cables out of the way, you can now use a plastic opening tool to carefully pry the old LCD loose and out of the display.
- If you’re installing a new LCD, simply add it now and follow these instructions in reverse to complete the installation.
Carefully peel the two flex cables from the back housing of the LCD. Be exceptionally careful during this process, as those flex cables can be easily ripped.
With the flex cables out of the way, you can now use a plastic opening tool to carefully pry the old LCD loose and out of the display.
If you’re installing a new LCD, simply add it now and follow these instructions in reverse to complete the installation.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Taylor
Member since: 08/30/2012
244 Reputation
1 Guide authored
Badges:
9
+6 more badges