Difficulty
Very easy
Steps
4
Time Required
5 minutes
Sections
2
- Rear Panel
- 1 step
- SIM Card
- 3 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackMotorola Droid 4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
You will need to remove several torx head screws. Make sure to use the correct type.
What you need
Step 1
Removing Rear Panel
- Insert the rear cover removal tool, or a paper clip, in the hole near the back camera lens.
- Slide the cover down to remove.
Insert the rear cover removal tool, or a paper clip, in the hole near the back camera lens.
Slide the cover down to remove.
1024
Step 2
Lifting the SIM card cover
- Using tweezers or your finger, lift the rubber SIM card cover to expose the card itself.
Using tweezers or your finger, lift the rubber SIM card cover to expose the card itself.
Step 3
Removing SIM card
- While holding the cover open, use your finger to press and slide out the SIM card.
- When reinserting the SIM card, make sure the SIM card is oriented in the correct direction, according to the illustration on the device, and that the metal contact area of the card is facing down.
While holding the cover open, use your finger to press and slide out the SIM card.
When reinserting the SIM card, make sure the SIM card is oriented in the correct direction, according to the illustration on the device, and that the metal contact area of the card is facing down.
Step 4
Insert new SIM card
- Follow the same steps in the opposite order to install the new SIM card.
- Make sure the SIM card is oriented in the correct direction, according to the illustration on the device, and that the metal contact area of the card is facing down.
Follow the same steps in the opposite order to install the new SIM card.
Make sure the SIM card is oriented in the correct direction, according to the illustration on the device, and that the metal contact area of the card is facing down.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Javier
Member since: 09/29/2014
530 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 5-1, Mcgee Fall 2014
Member of USF Tampa, Team 5-1, Mcgee Fall 2014
USFT-MCGEE-F14S5G1
5 Members
5 Guides authored