Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
5
- Rear Case
- 2 steps
- Battery
- 1 step
- Midframe
- 2 steps
- Motherboard
- 3 steps
- Earpiece Speaker
- 1 step
Flags
0
BackMotorola Defy
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.
Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.
1024
Step 2
- Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.
Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.
Step 3
Battery
- Use a plastic opening tool to pry the battery out of the phone.
Use a plastic opening tool to pry the battery out of the phone.
Step 4
Midframe
- Unscrew the two silver screws located at the top of the back of the phone.
Unscrew the two silver screws located at the top of the back of the phone.
Step 5
- Use a plastic opening tool to gently pry the midframe from the rest of the phone.
Use a plastic opening tool to gently pry the midframe from the rest of the phone.
Step 6
Motherboard
- Use metal spudger to pry off the middle yellow flap carefully.
Use metal spudger to pry off the middle yellow flap carefully.
Step 7
- Use tweezers again to pry off the second yellow flap carefully.
Use tweezers again to pry off the second yellow flap carefully.
Step 8
- The motherboard is the whole green board. Pry it off carefully with tweezers from the sides and place it aside.
The motherboard is the whole green board. Pry it off carefully with tweezers from the sides and place it aside.
Step 9
Remove the earpiece speaker
- Once the motherboard is removed, use either the metal tweezers or the metal spudger to remove the speaker by prying it as shown.
- The speaker is glued to its position, thus you will have to glue the new one back on.
- The speaker must be pried off carefully. It is very delicate.
Once the motherboard is removed, use either the metal tweezers or the metal spudger to remove the speaker by prying it as shown.
The speaker is glued to its position, thus you will have to glue the new one back on.
The speaker must be pried off carefully. It is very delicate.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Andres
Member since: 10/08/2014
101 Reputation
1 Guide authored
Badges:
2
Team
USF Tampa, Team 14-2, Leahy Fall 2014
Member of USF Tampa, Team 14-2, Leahy Fall 2014
USFT-LEAHY-F14S14G2
4 Members
6 Guides authored