Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

4

  • Rear Case
  • 1 step
  • Battery
  • 1 step
  • Front Case
  • 1 step
  • Logic Board
  • 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackMotorola C350

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear case freeing
  • Use your finger to press the button and free the device rear case.
  • You may have to force it a bit more to free its bottom if you open it for the first time.

Use your finger to press the button and free the device rear case.

You may have to force it a bit more to free its bottom if you open it for the first time.

1024

Step 2

              Removing battery
  • slide the black button to free the battery so you can grab it with your other hand.

slide the black button to free the battery so you can grab it with your other hand.

Step 3

              Separating the front case
  • You will see one plastic clip on each side of the device. Use your thumbs to push them apart and being able to separate the front case from the device other components.

You will see one plastic clip on each side of the device. Use your thumbs to push them apart and being able to separate the front case from the device other components.

Step 4

              Logic Board
  • Remove the 4 T6 Torx screws

Remove the 4 T6 Torx screws

Step 5

  • Use a metal spudger to pell off the four metal clips and separate the motherboard and keyboard from the main plastic part.

Use a metal spudger to pell off the four metal clips and separate the motherboard and keyboard from the main plastic part.

Step 6

  • The last thing you need to doto access the Logic Board is to separate the Keyboard/Screen block just taking apart with your fingers.

The last thing you need to doto access the Logic Board is to separate the Keyboard/Screen block just taking apart with your fingers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Vincent Monteil

Member since: 07/06/2013

6,843 Reputation

                                      19 Guides authored                  



                       Badges:
                       30







                                                        +27 more badges