Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

  • Screen
  • 4 steps

Flags

3

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Missed a Step

Oops! This guide is currently missing some important steps.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackMotorola C290

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outside Case removal
  • Flip open your Motorola C290.
  • Remove rubber stoppers located around main screen using a push pin.
  • This reveals four screws.
  • Use a Torx T6 Screwdriver to unscrew the four screws.

Flip open your Motorola C290.

Remove rubber stoppers located around main screen using a push pin.

This reveals four screws.

Use a Torx T6 Screwdriver to unscrew the four screws.

1024

Step 2

              Removing the front casing
  • Use a plastic opening tool to pry open a gap between the top cover and the face of the phone.
  • Slide the plastic opening tool along gap and pry open case.
  • Remove top cover.

Use a plastic opening tool to pry open a gap between the top cover and the face of the phone.

Slide the plastic opening tool along gap and pry open case.

Remove top cover.

Step 3

              Disconnect the motherboard
  • Unclip circuit attachments located on back of screen circuit board using a Spudger.

Unclip circuit attachments located on back of screen circuit board using a Spudger.

Step 4

              Removing the motherboard/screen
  • Insert the plastic opening tool between the metal screen components and the plastic frame at the corners.
  • Firmly pry the screen components from the frame with a twisting motion
  • You will need to apply a good amount of force as you pry, twisting in a right-to-left motion.
  • Completely remove screen components from frame.

Insert the plastic opening tool between the metal screen components and the plastic frame at the corners.

Firmly pry the screen components from the frame with a twisting motion

You will need to apply a good amount of force as you pry, twisting in a right-to-left motion.

Completely remove screen components from frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 10 other contributors 


                    Angelo Ballungay

Member since: 04/15/2010

79 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 24-28, Regan Spring 2010                        

                                                  Member of Cal Poly, Team 24-28, Regan Spring 2010 



                    CPSU-REGAN-S10S24G28                     


                                            4 Members                     


                                            6 Guides authored