Motion Computing Le1600 Bluetooth Module Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          2 minutes            

Sections

2

• Battery
• 3 steps
• Bluetooth Module
• 9 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackMotion Computing LE1600

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn the device so the screen is facing down.

Turn the device so the screen is facing down.

1024

Step 2

• Slide the battery lock switch next to the power slider to the unlocked position.

Slide the battery lock switch next to the power slider to the unlocked position.

Step 3

• Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet.
• When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.

Slide and hold the switch by the fan vent to the unlocked position. Firmly grasp the battery and pull away from tablet.

When replacing the battery, place the end near the fan vent in first. Make sure to keep the other switch in the unlocked position while pushing the battery into place.

Step 4

              Bluetooth Module               

• Unscrew hard drive panel using a Phillips head #1 screwdriver.
• (Our device was not given to us with a hard drive or a hard drive panel)

Unscrew hard drive panel using a Phillips head #1 screwdriver.

(Our device was not given to us with a hard drive or a hard drive panel)

Step 5

• Pull clear plastic tab to detach hard drive from tablet.

Pull clear plastic tab to detach hard drive from tablet.

Step 6

• To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.

To disconnect the three white ribbon cables on the side closest to the hard drive connector, pull the white plastic tabs.

Step 7

• Pull the brown tabs to disconnect the white ribbon cable on the other side.

Pull the brown tabs to disconnect the white ribbon cable on the other side.

Step 8

• Caution: do not pull on the wires, instead pull from the plastic connectors.
• To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.

Caution: do not pull on the wires, instead pull from the plastic connectors.

To disconnect the remaining ribbon cables, pull the plastic connectors away from their connections.

Step 9

• With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.

With a Phillips #1 screwdriver, Unscrew the nine 10mm screws holding the case together.

Step 10

• Using a spudger, press in the five tabs on the side where the battery was.
• This should separate the two halves of the device. Carefully set the side with the display off to the side.

Using a spudger, press in the five tabs on the side where the battery was.

This should separate the two halves of the device. Carefully set the side with the display off to the side.

Step 11

• Locate the Bluetooth board.
• Disconnect the ribbon cable by pulling on the plastic connector.

Locate the Bluetooth board.

Disconnect the ribbon cable by pulling on the plastic connector.

Step 12

• Unscrew the 4mm screw holding the board onto the tablet.
• Lift the board out of the tablet and carefully set it aside.

Unscrew the 4mm screw holding the board onto the tablet.

Lift the board out of the tablet and carefully set it aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    David Troy                     

Member since: 04/04/2012

44 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team 15-14, Forte Spring 2012                        

                                                  Member of Cal Poly, Team 15-14, Forte Spring 2012 



                    CPSU-FORTE-S12S15G14                     


                                            5 Members                     


                                            5 Guides authored