Montgomery Ward Gen 39500 Subwoofer Replacement Repair Guide

Difficulty

Difficult

Steps

6

Time Required

                          30 minutes - 1 hour            

Sections

2

• Back Cover
• 3 steps
• Subwoofer
• 3 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackMontgomery Ward GEN-39500

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Remove the nine 35 mm Phillips screws securing the back cover of the case.

Remove the nine 35 mm Phillips screws securing the back cover of the case.

1024

Step 2

• Carefully remove the back cover.
• Soldered wires connect electronics on the back cover to the internal electronics. Be careful not to break any connections.

Carefully remove the back cover.

Soldered wires connect electronics on the back cover to the internal electronics. Be careful not to break any connections.

Step 3

• Unplug the black and yellow wires connecting the power supply unit to the rest of the electronics:
• This is not necessarily required. This step is to allow the back cover more movement as you work on the inside of the unit.

Unplug the black and yellow wires connecting the power supply unit to the rest of the electronics:

This is not necessarily required. This step is to allow the back cover more movement as you work on the inside of the unit.

Step 4

              Subwoofer               

• Unsolder the wires leading to and from the subwoofer.

Unsolder the wires leading to and from the subwoofer.

Step 5

• Unscrew the four 12.5 mm Phillips screws holding the subwoofer in place.
• One of the screws holds down a metal cable organizer. For better cable organization after reassembly keep track of this organizer.

Unscrew the four 12.5 mm Phillips screws holding the subwoofer in place.

One of the screws holds down a metal cable organizer. For better cable organization after reassembly keep track of this organizer.

Step 6

• Remove the subwoofer.
• The process is the same for both sides.

Remove the subwoofer.

The process is the same for both sides.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Dustin Platt                     

Member since: 04/01/2015

931 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Cal Poly, Team 12-5, Lancaster Spring 2015                        

                                                  Member of Cal Poly, Team 12-5, Lancaster Spring 2015 



                    CPSU-LANCASTER-S15S12G5                     


                                            4 Members                     


                                            13 Guides authored