Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

  • Speaker Grille
  • 8 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackMonster Soundstage S2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker Grille
  • Use a spudger or your fingers to pry off and remove the rubber pad on the bottom of the speaker.

Use a spudger or your fingers to pry off and remove the rubber pad on the bottom of the speaker.

1024

Step 2

  • Remove the five 10mm screws with a TR 10 screwdriver.
  • Use a spudger to break the remaining adhesive holding the grille to the speaker body.
  • Be sure you don’t bend the grille; it is not free from the speaker yet.

Remove the five 10mm screws with a TR 10 screwdriver.

Use a spudger to break the remaining adhesive holding the grille to the speaker body.

Be sure you don’t bend the grille; it is not free from the speaker yet.

Step 3

  • Flip speaker around and use a plastic opening tool to remove the top panel from the speaker.

Flip speaker around and use a plastic opening tool to remove the top panel from the speaker.

Step 4

  • Use a plastic opening tool to remove the foam and uncover four more screws.
  • Use a TR 10 screwdriver to remove the five 10mm screws on the top of the speaker.

Use a plastic opening tool to remove the foam and uncover four more screws.

Use a TR 10 screwdriver to remove the five 10mm screws on the top of the speaker.

Step 5

  • Carefully remove the top cover.
  • Be careful not to tear or stress the cable that provides power to the power LED.

Carefully remove the top cover.

Be careful not to tear or stress the cable that provides power to the power LED.

Step 6

  • Use a TR 10 screwdriver to remove two of the 10mm screws that secure the speaker grille.
  • Do not attempt to remove the grille just yet.

Use a TR 10 screwdriver to remove two of the 10mm screws that secure the speaker grille.

Do not attempt to remove the grille just yet.

Step 7

  • With the top panel removed, use a spudger to remove the display panel.
  • The clips on the display panel are quite fragile. Pry up both edges of the display before attempting removal.
  • Use a TR 10 screwdriver to remove the four final 10mm screws securing the speaker grille.

With the top panel removed, use a spudger to remove the display panel.

The clips on the display panel are quite fragile. Pry up both edges of the display before attempting removal.

Use a TR 10 screwdriver to remove the four final 10mm screws securing the speaker grille.

Step 8

  • Remove the front speaker grille.

Remove the front speaker grille.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Shaw Hughes

Member since: 01/30/2017

828 Reputation

                                      5 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 21-5, Maness Winter 2017                        

                                                  Member of Cal Poly, Team 21-5, Maness Winter 2017 



                    CPSU-MANESS-W17S21G5                     


                                            4 Members                     


                                            12 Guides authored