Monster Soundstage S2 Front Speakers Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Speaker Grille
8 steps
Front Speakers
3 steps

Flags

BackMonster Soundstage S2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker Grille

Use a spudger or your fingers to pry off and remove the rubber pad on the bottom of the speaker.

Use a spudger or your fingers to pry off and remove the rubber pad on the bottom of the speaker.

1024

Step 2

Remove the five 10mm screws with a TR 10 screwdriver.
Use a spudger to break the remaining adhesive holding the grille to the speaker body.
Be sure you don’t bend the grille; it is not free from the speaker yet.

Remove the five 10mm screws with a TR 10 screwdriver.

Use a spudger to break the remaining adhesive holding the grille to the speaker body.

Be sure you don’t bend the grille; it is not free from the speaker yet.

Step 3

Flip speaker around and use a plastic opening tool to remove the top panel from the speaker.

Flip speaker around and use a plastic opening tool to remove the top panel from the speaker.

Step 4

Use a plastic opening tool to remove the foam and uncover four more screws.
Use a TR 10 screwdriver to remove the five 10mm screws on the top of the speaker.

Use a plastic opening tool to remove the foam and uncover four more screws.

Use a TR 10 screwdriver to remove the five 10mm screws on the top of the speaker.

Step 5

Carefully remove the top cover.
Be careful not to tear or stress the cable that provides power to the power LED.

Carefully remove the top cover.

Be careful not to tear or stress the cable that provides power to the power LED.

Step 6

Use a TR 10 screwdriver to remove two of the 10mm screws that secure the speaker grille.
Do not attempt to remove the grille just yet.

Use a TR 10 screwdriver to remove two of the 10mm screws that secure the speaker grille.

Do not attempt to remove the grille just yet.

Step 7

With the top panel removed, use a spudger to remove the display panel.
The clips on the display panel are quite fragile. Pry up both edges of the display before attempting removal.
Use a TR 10 screwdriver to remove the four final 10mm screws securing the speaker grille.

With the top panel removed, use a spudger to remove the display panel.

The clips on the display panel are quite fragile. Pry up both edges of the display before attempting removal.

Use a TR 10 screwdriver to remove the four final 10mm screws securing the speaker grille.

Step 8

Remove the front speaker grille.

Remove the front speaker grille.

Step 9

              Front Speakers

After removing grille, you will see the speakers.
Remove the eight 10mm screws that surround the speakers. There will be four around each speaker.

After removing grille, you will see the speakers.

Remove the eight 10mm screws that surround the speakers. There will be four around each speaker.

Step 10

Carefully lift each speaker from the housing. It may be necessary to break a light adhesive seal.
Be aware of the two wires that are connected to each speaker.
Set each speaker beside the main housing.

Carefully lift each speaker from the housing. It may be necessary to break a light adhesive seal.

Be aware of the two wires that are connected to each speaker.

Set each speaker beside the main housing.

Step 11

Carefully but firmly unplug the two wires from each driver.
The front speakers can now be removed.

Carefully but firmly unplug the two wires from each driver.

The front speakers can now be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Josue A Melgar

Member since: 01/27/2017

116 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team 21-5, Maness Winter 2017                        

                                                  Member of Cal Poly, Team 21-5, Maness Winter 2017 



                    CPSU-MANESS-W17S21G5                     


                                            4 Members                     


                                            12 Guides authored

Matt Gould - Feb 7, 2022

Does anybody know what size driver the rear woofer is and resistance, would like to repair an s3 for a friend in cuba who received a used one as a gift

Introduction#

What you need#

Team#

Introduction

What you need

Team