Difficulty

Difficult

Steps

5

Time Required

                          45 minutes

Sections

1

  • Speaker
  • 5 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackMonster DNA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker
  • Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws.

Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws.

1024

Step 2

  • Desolder the wires to completely remove the speaker.
  • Take note of the proper location of the wires reassembly.

Desolder the wires to completely remove the speaker.

Take note of the proper location of the wires reassembly.

Step 3

  • Use a heatgun to loosen the glue holding down the speaker.
  • Be careful to take safety precautions such as gloves as not to cause injury.

Use a heatgun to loosen the glue holding down the speaker.

Be careful to take safety precautions such as gloves as not to cause injury.

Step 4

  • Pry the speaker out using a plastic opening tool or metal spudger.
  • Using too much force will damage the headphones and the new speaker may not go back into place properly.

Pry the speaker out using a plastic opening tool or metal spudger.

Using too much force will damage the headphones and the new speaker may not go back into place properly.

Step 5

  • Insert new speaker and solder the five wires into corresponding positions onto the new speaker.

Insert new speaker and solder the five wires into corresponding positions onto the new speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Kevin Costello

Member since: 03/22/2017

213 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S4-G5, Julie Spring 2017                        

                                                  Member of UMass Dartmouth, Team S4-G5, Julie Spring 2017 



                    UMASSD-JULIE-S17S4G5                     


                                            4 Members                     


                                            6 Guides authored